home › Inheritance and donation › The best printer for home. What is the best printer for home use? Rating of color laser printers

The best printer for home. What is the best printer for home use? Rating of color laser printers

Color print available today like never before. In addition to expensive printers for the office, there are many budget models designed for small print volumes and then ideal for the home. We figure out which one is better to buy, how much it can cost good printer- just below our recommendations for models.

Choosing a printer: the main nuances

To understand how to choose a color printer for home use, you need to deal with the main question: what is the difference between different models. Today in the range you can find three types of printers.

Inkjet- printed on paper with tiny drops of black and color ink (from 3 to 6 colors) through a special matrix. They are inexpensive, easy to maintain, able to work with photographic paper. Original cartridges are not cheap, but for large print volumes, you can install continuous ink supply systems (CISS), this will greatly reduce costs. But most likely, you will have to forget about warranty service.

Advantages

affordable prices
compactness
low power consumption
Ability to print on thick photo paper

Flaws

head ink dries up when printing irregularly
cost per page is relatively high

Laser- here the magnetized particles of toner are transferred to the photoconductor, forming an image for paper on it. More suitable for the office, because they do not know how to print on photo paper. But they work much faster than inkjet ones - they can “spit out” up to 25 pages per minute.

Advantages

suitable for occasional printing
cost per page is low
the toner lasts a long time

Flaws

lower resolution than inkjet printers
do not print on thick photo paper

LEDor LED printers- This is a parallel branch of the development of laser printing technologies and works on a principle similar to laser printing. There is no photodrum in LED printer cartridges, which means you can not experiment with dubious refills and purchase original ones inexpensively.

The advantages of LED models are the same as those of laser ones, but they are more environmentally friendly, so they are better suited for home use. True, these printers are more expensive.

Printer specifications: what to look for?

Format. It is unlikely that you will need a printer designed for A0 - for domestic use, equipment with A4 (standard sheet of paper) and A3 (twice as large as A4) is more suitable.

Permission. For printing documents or pictures downloaded from the Internet, it is unprincipled. If you want to print photos, it is better to choose a model with a resolution of at least 4800x1200 for color format.

Print speed. Again, there is no point in dwelling on the “rate of fire” for the house. An inkjet printer can spend about 40 seconds to print a 10 * 15 photo, an inexpensive laser printer produces an average of 4-5 pages per minute.

Availability WiFi module . A great feature with which you can transfer files to print wirelessly. It is very convenient if you shoot on a smartphone - you do not need to connect it to a computer.

Total: a color printer for the home, which one to choose?

We have selected several models, inexpensive and popular.

Inkjet printers

Canon PIXMA TS304 - from 2,500 rubles

Small in size, it's a convenient and reliable option for low-volume, high-quality printing without being tied to a PC with a cord.
Suitable for regular, 2-3 times a week printing in small volumes - to issue a postcard or a title page for a diploma and an essay.

Advantages: low price, silent, high speed, wireless interface.

Flaws: to work with mobile gadgets by "air" you need a separate software, does not support iOS.

A good option, does not take up much space, while it looks quite stylish. Resolution 4800×1200 dpi will be quite enough even for photo printing. Despite the low price, the device has good feedback.

Canon PIXMA iP7240 - from 4200 rubles.

good speed - 10 ppm, color reproduction at the level of professional devices and a resolution of whole dpi 9600x2400;
the ability to print on the surfaces of CD / DVD discs, envelopes perfectly complements the functionality.

Advantages: affordable price, duplex printing, maximum resolution, work with mobile devices via WiFi;

Flaws: lack of CISS, you will have to spend money on consumables for large volumes of printing.

A good choice for those who want to showcase their creativity on glossy or matte paper in excellent quality.

Canon PIXMA G1410 - from 9000 rubles.

Equipped with CISS, this cartridgeless printer has saved the user the pain of choosing between economy and quality;
4800x1200 dpi resolution for borderless printing is more than enough for fast manufacturing quality documents and photos.

Advantages: the price-quality is optimal, the cost of a print will please any miser.

Flaws: Connect with USB cable only, not included.

A great option for those who print a lot. One refill of ink bottles is enough for about 7,000 color pages!

Epson L312 - from 8700 rubles.

with an excellent resolution of 5760 × 1440 dpi, the printer outputs 15 ppm in color over the USB interface. and 33 pages in black and white;
seal great photos on branded paper of any size. Together with this printer, you can organize an amateur photo studio at home.

Advantages: high quality fast printing and large ink containers of the CISS system - 70 ml.

Flaws: No wireless connection, 4-color system.

EPSON, seeing the inevitability of the trend, was the first to put its printers on sale with an already built-in CISS. Users greeted with a bang the opportunity to pour liters of ink in the RX and L series models. This model, although not the cheapest, is ready to give out up to 7500 color pages on one "charge".

Epson L805 - from 18,000 rubles

the same 5760 × 1440 dpi, but already at 37/38 pages per minute, via WiFi, with support for Mac OS;
borderless printing on labels, film, discs, and paper up to 300 g/m2.

Advantages: CISS, no ink codes required, wireless.

Flaws: expensive "native" ink, print quality is lame on plain paper in standard settings. Frequent user complaints about driver failures.

It hardly makes sense to buy one if you print a couple of sheets a week. But for an individual entrepreneur or a small photo studio, this is just a godsend!

Laser printers

The use of these devices is justified only by the very low price of the print in the long term. Although the printers themselves are not cheap.

Today, a computer without peripherals loses much in terms of functionality to a computer with additional equipment. Its components include a printer that allows you to display text and graphics information on paper. Every year there are new models of these devices, whose total number is measured in tens, if not hundreds of items. It is difficult for a non-specialist to understand this diversity. That is why we decided to prepare this rating in which we carry out comparative analysis the most popular models at the beginning of 2014, based on their functional characteristics.

Where to Buy the Best Business Printer

Printers can be purchased from various places:

In large retail chains. Here the prices are low, but the assortment is very small.

in computer stores. Good range for home use and low prices.

in specialized stores. Prices here are not much different from computer stores, but the range is the largest possible for the most demanding customers.

Rating of laser printers

Laser printers work on the principle of applying toner to paper and then melting it with a laser, after which it is securely fixed to the paper. The disadvantage of this type of printing is the difficulty in creating color images, which is why color laser printers are often used on an industrial or commercial scale. However, the advantage of laser technology is high quality and print speed, ink durability, low noise and low cost printing.

Print speed: 60 pages per minute. As a result, quality suffers.
Tray capacity: 600 sheets.
Advantages: low price, with analogues.

Print speed: 18 pages per minute (both black and white and color).
Cartridge yield: 10,000 pages.
Tray capacity: 250 sheets.
Duplex printing: manual.
Advantages: high quality printing (resolution is 9600x600 dpi). There is a Wi-Fi connection.

Print speed: 33 pages per minute.
Cartridge yield: 5,000 pages.
Tray capacity: 250 sheets.
Duplex printing: manual.
Advantages: there is a scanner, noiseless operation.

Print speed: 26 pages per minute.
Cartridge yield: 10,000 pages.
Tray capacity: 250 sheets.
Duplex printing: automatic.
Advantages: there is a scanner, noiseless operation, there is a Wi-Fi connection.

Print speed: 40 pages per minute.
Cartridge yield: 7,000 pages.
Tray capacity: 500 sheets.
Duplex printing: automatic.
Advantages: noiseless operation, there are Ethernet and USB connectors.

inkjet printer rating

These printers print using tiny nozzles on the print head. In this way, they spray ink onto the printed surface. This technology has many disadvantages:

high price Supplies;
poor print quality;
requirements for the printed surface;
drying of the print head;
and many others.

However, due to low cost, good speed, versatility and low noise level, such printers are still quite common among consumers.

Black and white print speed: 11 pages per minute.
Color print speed: 8 pages per minute.
Tray capacity: 80 sheets.
Advantages: touch screen, wireless connection, USB connector.
Disadvantages: high noise level.

Black and white print speed: 12.2 pages per minute.
Color print speed: 8.7 pages per minute.
Tray capacity: 100 sheets.
Maximum print resolution: 1200x4800 dpi.
Advantages: wireless connection, USB connector.
Disadvantages: high noise level, large dimensions, inability to print from a flash drive.

Black and white print speed: 35 pages per minute.
Color print speed: 27 pages per minute.
Tray capacity: 50 sheets.
Maximum print resolution: 1200x6000 dpi.
Advantages: USB connector, touch screen, automatic two-sided printing.
Disadvantages: high noise level, poor print quality of fine details.

Black and white print speed: 33 pages per minute.
Color print speed: 15 pages per minute.
Tray capacity: 100 sheets.
Maximum print resolution: 5760x1440 dpi.
Advantages: USB connector, wireless connection, touch screen, continuous ink supply system.
Disadvantages: inconvenient interface, large size.

This printer is somewhat different from the previous ones, as it is focused only on photo printing. Therefore, the speed, ink consumption and other parameters depend on the type of photo.

Maximum print resolution: 2880x1440 dpi.
Advantages: high print accuracy, good color reproduction, increased cartridge capacity, the ability to print on almost any surface.

Rating of home printers

Home printers have a number of special requirements that are necessary for comfortable use in a home environment. Such requirements include size, functionality, ease of management, low cost of the printer and printing, and much more.

Since each person may have different requirements for the printer, the following rating will contain different kinds printers that have their own functionality and focus.

A simple and inexpensive printer designed for daily home use. Multifunctionality and ease of use make it a versatile option for the home.

Printer type: inkjet.
Print speed: 8 pages per minute.
Tray capacity: 100 sheets.
Advantages: versatility, touch screen, high print quality, wireless connection, USB connector, low price.
Flaws: low speed printing, high noise level.

This device is a home version of an office printer. Suitable for those who regularly bring work home.

Printer type: LED.
Print speed: 33 pages per minute.
Tray capacity: 830 sheets.
Maximum print resolution: 1200x1200 dpi.
Advantages: multifunctionality, high printing speed, printing technology.
Cons: dimensions.

Compact and easy to use printer with good printing speed. Suitable for home use for any purpose.

Printer type: laser.
Print speed: 19 pages per minute.
Tray capacity: 150 sheets.
Pros: versatility, good speed printing, printing technology, small size.
Disadvantages: low print resolution.

Since this is a 3D printer, it's hard to describe its features within the usual parameters. This is one of the few 3D printers available to everyone today. A good price, clear design, availability - it's all combined here.

Print area: 150x150x150 millimeters.
Material: PLA or ABS plastic 1.75 mm.
Device dimensions: 36x31x31 cm.
Weight: 8.2 kilograms.
Advantages: high printing accuracy, low price, reliable design.

Rating of color laser printers

With excellent print quality, laser printers are widely used everywhere. However, their disadvantage, the difficulty of color printing, greatly reduces their functionality. Therefore, variants of color laser printers are being actively created today, which will make this technology accessible to everyone.

Print speed: 14 pages per minute.
Maximum print resolution: 600x600 dpi.
Tray capacity: 150 sheets.
Advantages: uses almost any material for printing, wireless communication.
Disadvantages: poor print quality, large size, high cost of printing.

Print speed: 30 pages per minute.
Maximum print resolution: 2400x600 dpi.
Tray capacity: 250 sheets.
Pros: Fast print speed, wireless connectivity.
Cons: Poor print quality.

Black and white print speed: 20 pages per minute.
Color print speed: 5 pages per minute.
Maximum print resolution: 600x1200 dpi.
Pros: small size, high quality printing.
Disadvantages: high cost of printing, a bit noisy.

Print speed: 18 pages per minute.
Maximum print resolution: 600x600 dpi.
Advantages: small size, good printing speed, versatility.
Disadvantages: high cost of printing.

Rating of 3D printers

Printers capable of printing three-dimensional objects have appeared on the market relatively recently. This is a relatively crude technology that still needs to be improved. However, even so, she managed to create huge demand and open up great opportunities.

Today's 3D printers are very expensive, large in size, and the cost of printing them is quite high. However, here are a few devices that deserve the attention of the buyer.

Basically a standard 3D printer. Good print area, mid-sized printer and solid construction. However, for the sake of this, the weight of the device was increased to 20 kilograms, which made it possible to make a stable structure on which accurate printing can be carried out.

Print area: 200x200x200 millimeters.
Material: ABS plastic 1.75 mm.
Dimensions of the device: 340x355x355 millimeters.
Weight: 20 kilograms.
Advantages: high printing accuracy, reliable design.
Disadvantages: high cost of printing.

Pretty compact and nice 3D printer, which has a very good functionality.

Print area: 140x140x140 millimeters.
Material: ABS plastic, PLA 1.75 mm.
Device dimensions: 260x260x340 millimeters.
Weight: 4.3 kilograms.
Advantages: compact size, reliable design, stylish design.
Disadvantages: high cost of printing, small print sizes, cost of the printer.

This printer has a fairly large print area, but this affected the dimensions of the device itself. The dimensions of the printer are quite large, and the construction is light. This casts doubt on the accuracy of the print. However, the cost fully justifies this doubt.

Print area: 285x153x155 millimeters.
Material: PLA plastic.
Device dimensions: 490x320x380 millimeters.
Weight: 11.5 kilograms.
Advantages: large print area, print accuracy.
Disadvantages: large size of the printer, cost of the printer, high cost of printing, only one type of plastic is used.

Stratasys Mojo

A professional 3D printer that allows you not only to create creative and creative products, but also to print full-fledged parts and other things needed in everyday life. The print quality here is quite high, and the closed print surface allows you to protect the process from adverse influences.

Weight: 8 kilograms.

Advantages: small size of the printer, reliable design, high quality and accuracy of printing.

Cons: Printer cost.

Although print speed is one of the main features of 3D printers, it is quite difficult to define it. After all, everything depends on the accuracy of the model, its shape, size, plastic and much more.

The best printers of 2014 - results / ranking

Thanks to this analysis offers on the printer market, you can determine the best models of various types. Samsung CLP-365W is the leader among laser printers. This is a versatile printer that allows you to print color and black and white images. Having a good resolution, it provides high print quality, good speed, and a good management interface.

Among the inkjet printers, Epson L355 can be distinguished, which has the best performance in its category. Although the Brother MFC-J825DW is on par with it, Epson has better print clarity as well as a user-friendly interface. The picture quality is good, and the speed allows you to print large amounts of information in a short time.

3D printers are a separate issue. Although it all depends on the requirements of the client, the Hyrel E2 Hobbyist can still be called the best copy. Extremely good build quality, accurate printing, compact size and large print space. Considering that its cost is not so high, today it is the best option for buying a 3D printer.

As for the best home printer, here everything is individual. You need to think about what is expected from this device. And based on this, choose the most optimal option that meets the requirements.

Best printer 2014 - detailed description

Still, the best printer for universal use can be called Samsung CLP-365W. Relatively inexpensive price, wide functionality, great quality and print speed - all this makes this printer the best among the market offers. it a good option for office and home use, because the size of this device is quite small.

Advantages of this printer:

good print quality;
high speed;
Wi-Fi connection available;
good interface and management;
low price.

This is only a part of all the advantages that this printer has. However, there are also disadvantages here:

high printing cost.

Perhaps this is the only drawback that still cannot go unnoticed. The price of cartridges is high, and here they need as many as four.

Since all the advantages and disadvantages have already been discussed, we can only say that the price category and print quality make this printer accessible to everyone. A wide choice of interfaces, speed, low noise level and ease of use of this printer make it the best on the market.

Where to buy printers at competitive prices

This company specializes in the sale of modern printers. The range includes both laser and inkjet models from the world's leading manufacturers. A wide selection of goods and high professionalism of consultants will allow any buyer to make their choice and choose the best printer for themselves. Be sure that here you will find a model that will meet your requirements.

If you are planning to print documents, photos, various charts and graphs at home or in the office, then you should consider purchasing a color laser printer. The purchase of such a printing device is a necessity for both small and large offices. You will also need a device at home, especially for those families in which students, schoolchildren, teachers, etc. live. In this case, the question may arise, why a color laser printer? The thing is that a device with color printing technology has more functionality, for example, it will allow you to print photos - their quality and saturation of shades will depend directly on the selected model.

A color laser printer, according to the principle of its operation, is fundamentally different from its “brother” with jet technology. A special laser mechanism applies images to the surface of the photoconductor by means of a beam. Then the toner (powder) sticks to those parts of it that were charged with a laser beam. Next, the image is transferred to paper. On the last step The toner is fixed to the sheet by baking.

When planning to buy the best color laser printer, check out reviews of several devices to compare their features. First of all, pay attention to the cost of the device: for home use, it is best to choose a budget device with relatively little functionality, because. the high cost will not pay off by saving on the use of services of specialized centers. In addition, take into account the functionality of the model, namely:

Performance. A large amount of printing will destroy a device that is not designed for it, and printing a small amount of documents on an expensive and high-performance device is not economically feasible.
Speed. There are two parameters, depending on which the speed of obtaining prints is determined. First of all, this is the number of pages per minute - pages per minute (PPM). The second parameter is the time it takes to get the first print after the start. The first parameter is more important if you need to print a contract or any contract of 100-200 pages. But, if you need to get a lot of two-page documents, for example, letters, warranty cards, then the speed of getting the first page is more important than the PPM value.
Permission. Defined as the number of dots of toner per inch of print - measured both horizontally and vertically. The higher this value, the clearer and more detailed image you can get.
The cost of consumables. A very important selection criterion. Be sure to find out how expensive the toner and the cartridges themselves are. Do not forget that the drums also need to be changed after a certain number of prints received.
Memory. The more of it, the better. The minimum value for high-volume network printing is 512 MB, but for the office, it is better to choose a device with 1 or even 2 GB of memory. Alternatively, you can purchase a device with the possibility of increasing memory in the future.
Types of materials (carriers). Some models of office equipment with laser printing technology are able to leave prints not only on paper, but also on cardboard, film, etc. Decide in advance whether you need such an opportunity, otherwise it makes no sense to overpay for this add-on.
Energy consumption. Laser devices tend to consume more power than their inkjet counterparts. This is due to the fact that they have a sheet heating function.
Noise. This parameter is very important when working in an office environment, when excessive noise can annoy employees. Devices that use toner are less noisy than models with ink. Therefore, there should not be any problems in this case.
Availability of duplex printing. Be sure to decide if this feature is important to you or not. Not all laser devices are equipped with it.

Choosing a color laser printer for the home

An inexpensive color laser printer is quite suitable for working at home. An ideal choice can be a device with Wi-Fi, which facilitates the organization of communication between office equipment and a personal computer directly. In general, choosing a color laser printer for the home is less complicated than choosing a model for the office. You can immediately start searching for a device among the budget category, because. the performance of the device and the resource of color cartridges do not always matter for those who use office equipment at home. In general, the following models may be suitable for home use:

Samsung SL-C430

A good choice for organizing a small home office. Due to proprietary Ecoprint technology, the device saves toner up to 20 percent. The maximum resolution for black and white prints is 2400×600 dpi. You can get up to 18 A4 pages per minute (for color printout, this value is 4). The USB interface is used to connect to a PC. The first color print can be obtained in 26 seconds. The device uses 4 cartridges: the black resource is 1.5 thousand pages, the color resource is 1 thousand pages. It weighs about 10 kg, the noise level during operation is 48 dB. Mobile printing is not supported.

Xerox Phaser 6020

Printer with 4-color printing at a speed of 12 ppm. (b/w) and 10 ppm. (printing) A4 format. The paper input and output trays hold 150 and 100 sheets. The resolution setting is 1200×2400 dpi. The first print needs to wait 19 seconds. The resource is designed for 30 thousand pages/month. The amount of built-in memory is only 128 MB. There is support for the following interfaces: Wi-Fi, 802.11n, USB. The weight of the device with dimensions of 39.4x23.4x30.4 cm is 10.9 kg. The resource of color and black-and-white cartridges is equal to 1000 and 2000 pages respectively.

HP LaserJet Pro M252n

Machine with 4-color laser printing and an LCD panel that displays current information about the operations being performed. The resource is designed for 30 thousand pages per month. The resolution is small - 600 × 600 dpi, the print speed is acceptable - 18 pages per minute. Get your first print in just 11.5 seconds. for b/w and 13 sec. for color. The built-in memory is 125 MB, there is support for USB 2.0 and Ethernet (RJ-45) interfaces. It is very convenient that the model supports AirPrint technology. Power (consumption) during operation is 375 watts, and in standby mode - only 8.7 watts.

Canon i-SENSYS LBP7018C

A good choice for the home, if the need for printing documents and photos is relatively small. Productivity reaches 16 pages/min. (4 ppm for color), and the resolution is 600 × 2400 dpi. True, the resource is relatively small - only 15 thousand pages per month. The paper input tray is designed for 150, and output - for 50 sheets. The amount of internal memory is very small - 16 MB. Of the interfaces, there is only support for USB 2.0. Consumption during operation is 868 W, which is higher than other models. The device also weighs more than analogues - 12.3 kg.

Canon i-SENSYS LBP611CN

A compact color laser device that allows you to get up to 18 prints in one minute. It is important that the device has support for mobile work. Due to the high quality printouts and ease of maintenance, the model is ideal for home use and equipping small offices. In addition, it is equipped with a 5-line LCD display. The load per month is 30 thousand pages. Supported interfaces include USB 2.0, RJ-45. The formats of the materials used are varied, because the model is also suitable for making prints on envelopes, postcards. True, the noise level reaches 63 dB.

Choosing a color laser printer for the office

When deciding to purchase a device with laser printing technology for office work, pay attention to more powerful models. Take into account the price of the device, the approximate cost of printing one country, the number of sheets received per minute, and some other parameters. Be sure to find out how large the amount of internal memory is - this is a very important parameter if several employee PCs will be connected to the device. If you have not yet made a specific choice, then take a look at the following laser printers for printing photos and plain text documents:

Ricoh Aficio SP C240DN

A good purchase for an office with several PCs, productivity reaches 16 ppm. There is an LCD panel. The resource, according to the manufacturer, is about 30 thousand pages per month. Resolution for color printing is 2400×600 dpi, and for b/w - 600×600 dpi. It takes about 30 seconds for office equipment to warm up, and 14 seconds for the first print to come out. There is an automatic two-sided printing function. The amount of memory for an office device is very small - only 64 MB. The model weighs about 24 kg with dimensions of 40x32x45 cm.

Kyocera Ecosys P5021cdn

Medium office printer with print speeds up to 21 ppm. and maximum A4 format. Like many other models, there is an LCD panel, a two-sided printout function. Monthly load - 30 thousand pages, resolution - 1200 × 1200 dpi, memory capacity - 512 MB. A big plus is the support for AirPrint technology, as well as the presence of a device designed to read SD memory cards. Power consumption is average - about 345 watts during operation and 33 watts in standby mode.

HP Color LaserJet Pro M452dn

A powerful and high-performance model that allows you to get up to 27 prints in 1 minute. The presence of an LCD panel, two-sided printing, an increased monthly load (50 thousand pages) are ideal parameters for a small and medium office. True, the resolution is only 600×600 dpi, and the memory is 256 MB - a small value for the office. There is support for such interfaces as USB 2.0, Ethernet (RJ-45). This model also uses AirPrint technology, which is used in mobile devices manufactured by Apple.

HP LaserJetEnterprise 500 M553n

A rather expensive device compared to the listed options, but the cost is fully consistent with performance and quality. About 38 pages can be obtained per minute using this model. The LCD panel displays all ongoing operations. The monthly resource is impressive - 80 thousand pages. The first b / w print comes out in 6 seconds, and color - in 7 seconds. Ideal is the amount of built-in memory - 1024 MB. Color resource. cartridge is designed for 5000 prints, and b / w - 6000.

Canon i-SENSYS LBP653Cdw

A duplex printing machine with Wi-Fi capability that also has an LCD panel. The speed reaches 27 ppm, which is optimal for an average office. The resolution parameter is small - only 600 × 600 dpi. It takes about 13 seconds to warm up, and 8.3 (b/w) and 8.6 (colour) seconds to make the first print. Volume random access memory, installed in the device, is equal to 1 GB. During operation, the printer consumes up to 1400 watts, and in standby mode - only 17.6 watts.

HP Color LaserJet Enterprise M652dn

Office equipment with LCD-screen and duplex printing support. The device is also suitable for making prints on films, labels. The monthly resource is designed to receive 100 thousand pages in A4 format. The first print comes out in about 6.5 seconds. Productivity of a device reaches 47 pages/min. and the resolution value is 1200x1200 dpi.

Samsung Pro Xpress SL-C3010ND

Reliable laser color printer measuring 42x31.1x45.3 mm and weighing 19.74 kg. Built-in memory is 256 MB - more suitable for a small office. There is a 2-line LCD display. Direct printing from USB media is possible. Obtaining the first page in b / w printing takes 9 seconds, and color. – 10 sec. The device, like many others, uses 4 colors. The following print media (except paper) is supported: Envelope, Label, Card. The maximum speed reaches 30 p./sec.

Brother HL-L8260CDWR

A machine with a maximum resolution of up to 2400 x 600 dpi and a print speed of approximately 31 ppm. Like other analogues, it is equipped with an LCD display. The amount of RAM is 256 MB, there is support for such interfaces as Wi-Fi, USB 2.0, RJ45. The paper input tray holds 300 sheets and the output tray holds 150 sheets. The resource of the photodrum is about 30 thousand, the b / w cartridge is 3 thousand, the color is 1.8 thousand pages.

Therefore, choosing the best color laser printer for home or office use is a crucial step. Here it is very important not to make a mistake with the optimal parameters and functionality of the device, so as not to overpay for extra performance or those functions that you do not plan to use. It is important to take your time with the purchase, weigh the pros and cons of each model in order to ultimately make a reasonable purchase that will satisfy your needs and last for several years.

Translated into human language - how many pages can be printed before the printer has to be refilled. A good home laser printer produces 1200 to 2000 pages before reloading. The resource of black and color toner may be different, this is also worth considering. Of course, the larger the resource, the better, the longer the use of the printer will last before refueling.

Paper size

For the home, print speed is not as important as the size of paper that can be used. As a rule, home laser printers support A4 or A3 formats. Specify what can be printed on: cardstock, labels, glossy paper, transparencies, envelopes, matte paper, thermal transfer paper, and so on. This is usually indicated in the specifications.

Interfaces

A modern printer can accept documents for printing via different channels - wired and wireless. It can be either USB or Ethernet, or Wi-Fi, Bluetooth, NFC. If you think about which laser printer is better to buy for home use, then ideally it should support wireless interfaces. After all, you may suddenly want to print a photo from a smartphone or tablet, for example - “by air” is much faster.

Rating of laser printers for home-2019

As always, here is a selection of laser printers for the home that print well and are inexpensive. It should be noted that even an inexpensive color "laser printer" will cost from 9,000 to 13,000 rubles - this is a single investment in good printing, which is worth saving up for.

Ricoh SP C260DNw

Possibly the best color laser printer on a budget. It provides 2-sided 4-color laser printing on A4 (210 x 297 mm) paper, as well as card stock, labels, glossy paper, envelopes and matte paper.

The resource of color toner is 1600 pages, black - 2000 pages, but if you buy an original replacement cartridge - it will cost about 5 thousand rubles. However, you can choose compatible consumables. The printer initially ships with a 1,000-page starter cartridge. The printer supports Ethernet (RJ-45), Wi-Fi 802.11n, NFC and USB 2.0 interfaces. You can also use Apple's proprietary AirPrint technology for iOS and OS X devices.

Users note the high print quality and vibrant colors that are rarely found in this class of printers. In addition, it is considered the most "long-playing" laser state employee for the home.

Samsung Xpress C430W

Next in price is a printer from Samsung, which is also a four-color "laser". It prints on A4 (210×297mm) paper, but the maximum print size is slightly larger at 216×356mm. Therefore, it can also print on card stock, transparencies, labels, glossy paper, envelopes, and matte paper.

Its toner resource is small, if we take the previous model for comparison. The color cartridge is enough for 1000 pages, black and white - for 1500 pages. But it supports Ethernet, Wi-Fi 802.11n and USB 2.0 in the same way, as well as AirPrint.

User opinions about the device differ. Some note fast high-quality printing (and there is an economical printing mode), ease of setup and installation, Wi-Fi and AirPrint, as well as small dimensions. Others scold the device for the lack of duplex printing and the very high price of consumables. Users are also very dissatisfied with the fact that the cartridges for the printer are "chip", that is, only the original one can be installed - compatible ones will not work. In a word, the device is controversial, but popular.

Kyocera Ecosys P5021cdn

But this model is praised by buyers. The printer supports duplex laser printing in 4 colors. The maximum paper size that can be used is A4 (210 × 297 mm) and the maximum print size is 216 × 356 mm.

The device can print on cards, transparencies, labels, envelopes, glossy and matte paper. Moreover, users note the high quality of printing on any paper: the printer is able to determine its type (although sometimes it gets confused) and automatically adjust its settings specifically for it.

The resource of a color and black-and-white cartridge is the same - 1200 pages. But there is a problem with support for wireless interfaces: only Ethernet, USB 2.0, as well as SD memory cards (exactly this format, check what the difference is), and direct printing - that is, connecting a camera, flash drive or other device via USB 2.0 directly to printer. So it's a fully wired device.

Users are very pleased that the printer does not have chipped, easy-to-refill cartridges. Compatible cartridges are also supported at a low price, which can be bought instead of the original ones. There is also a surprisingly economical consumption of toner: one refill is enough for almost a year of use.

HP Color LaserJet Pro M254nw

This model is more modern. The printer supports four-color laser printing, duplex printing is also available. The maximum print size is A4 (210×297mm) and the maximum print size is 216×356mm. The device prints on cards, transparencies, labels, glossy paper, envelopes, matte paper, as well as photo paper, unlike all previous ones.

His resource, however, is small: 1300 pages of color printing and 1400 - black and white. At the same time, HP has always been distinguished by the incredible high cost of original consumables, so refilling this device is cheaper through a cartridge refilling service - it will cost about 600 rubles.

In terms of interfaces, the printer is convenient, HP devices support Wi-Fi from the very dawn of its active distribution, and this particular model can work via Ethernet, Wi-Fi 802.11n, USB 2.0, direct printing and via AirPrint.

Users, of course, scold HP for the high cost of consumables, and the company is actively fighting "refuellers" and deprives the warranty of those who contacted the service. In addition, this particular model is criticized for its low print resolution - 600 × 600 dpi, so if you print images on it, then only small ones.

Canon i-SENSYS LBP613Cdw

In conclusion, let's add a fairly popular model from Canon. Everything is available here - duplex printing in 4 colors, and standard format and print size (210 × 297 mm and 216 × 356 mm, respectively). The printer can handle cards, labels, glossy paper, envelopes, and matte paper. In a word, the whole "gentleman's set".

The resource of the cartridge is similar to that of HP - 1300 and 1400 sheets for color and black-and-white printing, respectively. It makes no sense to buy original consumables - it will be more expensive than a new printer. However, compatible refillable cartridges can be used, greatly reducing the cost of ownership.

Ethernet, Wi-Fi 802.11n, USB 2.0, Direct Print and AirPrint are supported. Users complained about printing problems in OS X, but in new version driver problems have been fixed.

Also, the printer does not work very well with thick paper weighing more than 180 grams, so you can’t print especially large cards on it. But for the price, it's a pretty decent piece of equipment.

CHIP SELECTION: we recommend models from Ricoh and Kyocera. At good quality They do not adhere to a rigid policy in terms of consumables and allow refilling and the use of compatible cartridges, which really allows you to ensure a low cost of maintaining the device.

Expand your printer knowledge:

Photo: PicturesBoss, stock, Epson, HP, manufacturing companies

There are about twenty well-known manufacturers of printers with laser printing technology. The leading position in terms of quality and variety of products is occupied by the HP brand. The manufacturer regularly releases new products, and the existing the lineup includes printers in all price ranges, giving users a good choice regardless of the budget. Along with Hewlett-Packard, you will be advised by such trade marks like Brothers, Canon and Xerox. These manufacturing companies, like HP, are time-tested and more than one thousand users.

In recent years, previously unknown names have increasingly appeared on the market for LED and laser printers. – Kyocera, OKI, Ricoh. All these are Japanese manufacturers of office equipment, offering the Russian client a whole range of interesting and functional models. Closes the "circle of winners" company Panasonic. A manufacturer with a lot of experience in the field of home appliances development is far from the top lines of the best, but it can rightly be proud of some very successful models of quality printers.

Affordable monochrome printer with laser printing technology designed for rare use in the office or at home. The device is convenient, practical and quite easy to set up and use. The printer easily connects to Wi-Fi, runs on Windows, Linux, Mac OS.

Intensive operation is not implied. Ricoh, like many manufacturers, equipped the cartridges with chips. Instead of the usual refueling, the user will have to purchase original consumables". Among analogues, this is one of best models, capable of operating wirelessly and printing up to 22 pages per minute.

the best combination of "price-quality";
inexpensive, compact;
quiet;
acceptable print speed;
good design and build.

non-refillable cartridges, buying a new replacement for 700 pages will cost a third of the price of the entire device;
whimsical to the density of paper (due to the design, the maximum allowable density is 105g/m²).

Prices on :

2. Brother HL-1112R

The budget model of a desktop black-and-white laser printer destroys all stereotypes. In spite of affordable price tag, technical part the device is not inferior anymore expensive versions other manufacturers. The average cartridge resource is 1000 prints, but the photoconductor must be replaced after 10,000 copies, and this is only if there are print defects.

The speed of work is quite acceptable - up to 20 pages per minute, the printer prints at the most different types paper whose maximum weight does not exceed 105g/m². The quality is best evidenced by reviews, among which almost all are positive.

A nice addition was the power saving option - the printer turns itself off after 30 minutes of inactivity.

accurate printing with good resolution;
profitability;
non-chip cartridges;
cheap service;
simple and easy to use.

the basic package does not include a USB cable;
mediocre printing of illustrations;
does not print on separate A5 sheets.

Evaluating the characteristics of this model, its practical use – studying and printing office documents. The device prints texts flawlessly, but pictures are not its forte.

Prices for Brother HL-1112R:

Best Performance Mono Laser Printer - Brothers Model. The device will not please lovers of color illustrations, its strong point is a large amount of black and white printing at a speed of 26 pages per minute. The quality of text or picture provides an excellent resolution of 2400 * 600 dpi. A competent design is complemented by an increased cartridge resource - 2600 pages, all this at a fairly affordable cost.

A high-performance device can rightly be called multi-interface, because it supports almost all variations of conjugation with different devices: AirPrint, Google Cluod Print, Cortardo Cloud Print, plus supports Wi-Fi. Needless to say, the ease of use is really on top.

duplex (automatic two-sided printing);
maximum paper weight 163g/m²;
easy installation and configuration;
fully Russified menu;
separate drum and cartridge;
unchip cartridges.

there is no cable to the computer in the kit;
Only manual exit from sleep mode.

Prices on :

Perhaps this is one of cheapest and highest quality color laser printers. Beneath the compact body lies powerful, high-quality mechanics with Canon's Quick First-Print technology, designed to reduce the time it takes to produce one print. However, the print speed is so "home" that the benefits of this technology are not particularly noticeable.

It can be assumed that the anti-crisis price is due to slow work, if there is no need for large volumes - this disadvantage will hardly be noticeable.

In general, the model is good, well-assembled, prints text / illustrations at a very decent level.

low price for a color device;
well-established hardware;
a high resolution;
compact dimensions;
economical energy consumption;
print resource - up to 15,000 pages / month.

One drawback - slow printing.

Prices on :

5. HP Color Laserjet PRO CP1025nw

Another successful model from HP is a compact color printer with laser printing technology. Why is he good? First, the laser printer is economical in terms of toner consumption and power consumption. Secondly, thanks to the ImageRet 2400 technology, the clarity and detail of color images has increased significantly. Thirdly, instead of original cartridges, you can install inexpensive compatible ones.

Judging by user reviews, the model has its drawbacks, but all this is more than covered economy. The cost of the device is quite acceptable, the quality is above average. The printer can be chosen not only for home needs, but for a small office.

connection via LAN, USB or Wi-Fi is available;
profitability;
lack of printing defects;
stable wireless connection.

complicated setup;
you don’t even need to install drivers “out of the box”, it’s better to download from the official site;
regular calibration is accompanied by noise and rotation of the mechanism, it is recommended to change its frequency in the settings.

Prices on HP Color Laserjet PRO CP1025nw:

The Japanese manufacturer offers many excellent models of laser printers, this is one of the list. The device on LEDs has a decent resource (30,000 pages / month) and a good print speed (22 pages / minute).

The model has been popular among understanding users for more than a year, and the secret of demand is very simple - non-chip cartridges. The functionality hints that the area of use of the device is somewhat wider than rare household tasks, however, for both home and office, the printer will become a reliable support for office work or study.

low costs for refueling;
duplex automatic printing module;
wireless connection;
multiple connection methods.

Of the shortcomings, one can only note noticeable noise during operation.

Prices on :

Excellent and inexpensive device from the category " for small office» at medium print speed. Handling the device is simple and pleasant: a logical control panel, good b/w and color printing speed.

As users write in their reviews, the printer does not create any problems during operation, there are no distortions or printing defects, the settings do not fall off, the color reproduction is at a high level. This model is a vivid example when the quality can be higher than the price.

LED printing technology allowed to slightly reduce the size and weight of the device, the external design is classic - without frills or unnecessary elements.

high-quality printing of text and images.
Ethernet support;
resource 30,000 pages per month;
good print speed.

to save the resource of the mechanism, it is recommended to give the printer a break every 50 pages;
expensive original cartridges, but compatible analogues are available for purchase online at 4 times cheaper;
English menu.

Prices on :

When size matters, this model is sure to grab attention. The most compact printer printed in color will comfortably fit on a 30cm wide shelf. Underneath the compact body is a 30,000 page yield per month, 128MB of memory and a 384MHz processor. There is support for Ethernet, as well as all popular operating systems: Windows, Mac OS, Linux.

The budget model of the printer for home use does not differ in top-end features, but the starting price justifies everything. Resolution 600 * 600 dpi, print speed is almost the lowest: 14 - 17 pages per minute.

A color LED printer is suitable for home, occasional or occasional use at work, when there is no need for high productivity and printing speed.

low cost;
color print;
support for major operating systems;
works with paper of average density;
quiet and compact.

unpredictable amount of toner in the starter cartridge;
lack of Wi-Fi.

Prices on :

One of the best models of color printers, where it blends very well reasonable price and high performance. This is another popular LED model designed for home or office, able to show high speed work. The device can easily print up to 36 pages per minute, has spacious paper trays and a decent resolution of 1200 * 1200 dpi.

high speed, both monochrome printing and color;
the resource of the device is above average - 75,000 pages per month;
lack of defects in printing, system errors;
prints well on paper with a maximum density of 250g / m²;
full production of cartridges.

There are no objective flaws.

Prices on :

The most high-performance laser printer model in the ranking combines two formats: A4 and A3. The machine prints up to 45 ppm A4 and up to 22 ppm A3. High print speed is not the only plus of the printer, its monthly resource is as much as 225,000 pages, the maximum paper weight is 350 g/m².

Cartridges deserve special attention: the black-and-white resource is approximately 24,000 pages, and up to 6,000 pages can be printed in color. A full-fledged option allows you to use the device to the maximum - there is support for Linux, Windows, Mac OS, and Ethernet. Installation available PostScript applications. The classic external design is completed by a small LCD screen.

The printer could be called "the most-most", if not for its impressive cost.

easily master large volumes of printing;
wide functionality;
a large resource of cartridges;
duplex;
resolution 1200*2400 dpi;
stable, flawless performance.

The disadvantage, as already noted, is the only one - the high price of the device.

Prices on :

A review of the best laser and LED printers included different models in its list: color, monochrome, cheap, expensive. Buying a printer is not a difficult task, but the selection process can take a long time. TOP 2017-2018 will help when buying a good model of a laser device for printing text documents, illustrations or graphs.

Popular in category: