Home › Mortgage › How to connect wired Internet via phone. Connecting a computer to the Internet via a smartphone

How to connect wired Internet via phone. Connecting a computer to the Internet via a smartphone

Internet via a mobile phone or smartphone that supports 2G and/or 3G communication technology can be configured on the user's computer.

Let's consider everything available methods such settings.

Connect your PC to the Internet via a smartphone (Wi Fi hotspot)

If you use your PC and urgently need access to the Internet, but don’t have a cable or router at hand, you can set up your smartphone as an access point. It will work like a router and you can connect to it from your computer.

Follow the instructions below to connect your laptop or PC to your smartphone with mobile internet:

Enable the wireless network in your computer's settings;

In the window that opens, create a name for the access point (any) and a password (minimum 8 characters). Click save and then move the slider that turns on the hotspot;
Now from your PC, connect to your mobile router just like you would to any other wifi router.

Connecting a smartphone to a computer as a modem

To connect, you must have a USB cable (to connect your smartphone to your PC).

Follow the instructions:

Connect the smart device to the PC using an adapter;
Immediately after connecting the smartphone, a dialog box appears on its screen asking you to select a connection mode. Ignore this window and close it;
Go to the main menu of the device and then go to the phone settings;
Open the USB modem setup window and set it to “Enabled” mode, as shown in the figure;

After turning on modem mode on your smartphone, the computer will automatically begin installing the necessary driver software. Several dialog boxes will appear during the driver installation process.
The user must check permission for subsequent connections to the modem, and also indicate the desired type of connection network);
After installing the driver, the PC will be connected to the network. A network connection icon will appear in the notification area of your operating system.

Pay attention! Computers with older versions of the operating system, for example,WindowsXP/Vista cannot automatically start installing the necessary drivers. In this case, you need to download the software from the official website of the smartphone manufacturer.

To make your Internet connection faster, select 3G connection technology in your smartphone’s mobile Internet settings.

Internet access from a computer via a regular cell phone

You can access the network from your computer by connecting the most ordinary cell phone to it.

There are several requirements for a mobile phone: it must support 3G, GPRS or EDGE connection technology, have a phone driver installed on the PC, a SIM card with Internet configured and in cash account, you also need a USB cable to connect your cell phone to your PC.

Follow the instructions to find out how to connect the Internet on your computer via your mobile phone:

Install the modem driver on your personal computer. You can download it from the manufacturer's website mobile device;
After installing the driver, you need to initialize the modem. To do this, connect your mobile to your PC and open the device manager;

In the tab with modems, select a cell phone, right-click on it and open the properties tab, then find the field for additional initialization parameters and write the following line in this field: AT+CGDCONT=1,”IP”,”active”. Click OK;

Now you need to create a connection. Open Network Management window and shared access and choose to create a new network as shown in the figure below;

Enter the dial-up number in the window that opens (usually *9**#, the number must be checked with your mobile operator);
Enter the information you received from the operator in the window shown in the screenshot below and click on the Create button.

Now the connection has been created, to access the network you just need to connect your cell phone to your PC, open the saved connection and press the call button. In a few minutes the Internet will be connected.

Thematic videos:

Using a mobile phone as a modem Windows 7

Dana detailed instructions, how to set up a computer and mobile phone as a modem to access the Internet.

How to connect the Internet to a computer via phone

In this video tutorial I would like to show how to connect the Internet to a computer via an Android phone.

This article discusses the stages of using a mobile communicator as a modem in order to connect a computer or laptop with Windows OS to the Network. Attention is also paid to the issue of how to set up the Internet on a Chinese phone.

What you need to have to connect

You must have a mobile phone with a built-in 3G, EDGE or GPRS modem. Any model of a Samsung, Nokia, Sony or other brand communicator may also be suitable. You need a USB cable to connect your phone to your computer. The wire can be replaced with a Bluetooth device. It is clear that in this option, the computer and phone must have appropriate adapters. It is necessary to have a modem driver or program for synchronization with the communicator. The software is most often supplied on disk along with the phone, and there is also the opportunity to freely download everything you need on the manufacturer’s website. You must have a SIM card from a valid mobile operator with a positive account balance. It is necessary that the data service is active for the SIM card. You can find out this from the operator, and, when the opportunity is not available, make a request to connect it. You also need to define a tariff plan and configure unlimited internet to the phone. You should find out at the service center or on the website of the mobile operator how to initialize and dial the number for the communicator. They will need to be noted in the modem settings, as well as during connection creation. Particular attention must be paid to choosing a service provider, since the quality and speed of the Internet connection between different providers can vary significantly. These parameters also depend on the region of residence and time of day.

How to connect

Setting up a connection when you need Internet on your phone via a computer is carried out in several stages. Install the driver and connect the phone to the PC or laptop. First of all, you need to install a synchronization program on your computer, and then connect your phone to it using a cord or via Bluetooth. When there is no application for combining, but you need Internet on your phone through a computer, and there is only a folder containing driver files, first of all you need to connect the communicator to the PC. When the system starts installing new equipment, mark the path to this directory inside the desired window.

Carrying out setup

Open access to the device manager of the operating system. In the "Modems" section, find your phone model and click "Properties". In the new window, go to the tab with additional communication parameters and enter the initialization string in the commands column. Next, click the consent button. As mentioned earlier, all the necessary data, if you need Internet on your phone via a computer, you need to find out in service center. The initialization string will certainly determine which service can be used. As a rule, for everyone tariff plan its own parameter is provided.

How to create a connection

The procedure for gaining access to the Internet on your phone via a computer at this stage depends on the version of Windows. In the “Start” menu, follow the path: “Control Panel”, then “Network and Internet Connections”. In the next step, double-click on the “Wizards” icon. In the first window, click “Next”. In "Type network connection» Check the box “To the Internet”. Click "Next". On next stage select “Manual connection settings”. Next, we will consider the procedure for setting up the Internet on a Chinese communicator. We will describe the necessary actions using the example of the MegaFon network and a copy of the iPhone smartphone from the Celestial Empire. The setup procedure is typical for all major telecom operators. Need to order using a special number automatic settings, and then save them. Thus, it does not matter which manufacturer's phone you use. If you are a MegaFon subscriber, you can always call the subscriber service at 0500 to get settings for your communicator. Provide the operator with the required information. Following the conversation, you will receive a message on your phone with the necessary settings.

Articles and Lifehacks

This manual will tell you how to how to use the Internet from your phone to your computer via USB– using a data cable and the appropriate settings on your phone and computer.

Windows 7 will be used as the base operating system, the settings of which can be easily adapted to both earlier and older versions.

Configuring mobile device settings

1. First you need to set a certain configuration for your mobile device;

2. You need to go to the settings section and there to the wireless networks section, enter “Modem Mode” and check the “USB” item;

Date cable and drivers

Now we connect the data cable to the mini USB port of the mobile phone and to the USB socket of the computer. In this case, in most cases, the necessary driver programs will have to be installed independently. Otherwise, they will need to be installed manually.

If everything is connected successfully and correctly, the screen will display a corresponding notification.

Configure your computer settings

1) To do this, you need to go to the “Control Panel” (Start menu) and set its viewing mode to “Large icons”;

2) Then enter the “Modems and Phones” section, where a request may appear specifying the geographic location (here you can write anything you want and click confirmation);

3) After this, the required “Modems and Phones” directory will become available, from which you can go to the tab with modems;

4) Here you need to find in the proposed list the model of the mobile device you are using, which in this case acts as a modulation/demodulation unit, and by activating it go through the “Properties” section;

5) In the directory that appears, you need to go to the section for additional communication parameters and enter the following code in the initialization line: AT+CGDCONT=1,"IP","internet";

6) Now you need to close everything through confirmation open windows(OK) except for the main settings, in which you should go to the “Sharing Control Center”, and from there to “Settings for a new network connection”, selecting the connection settings via phone option;

8) Here you do not need to specify a password and username, but only the name of the operator used, as the connection name, and telephone number;

9) Now you only need to activate the connection with confirmation and, after it has been successfully established, you can click on the network overview button, after which the default browser with a valid Internet should open.

All. Connection to the network via your phone is successful.

Adviсe

On each individual phone there may be software differences in the menu from those indicated in this manual, but they will all be intuitively similar.

If the connected phone uses more than one SIM card, then the Internet connection will come from the card of the first value.

The APN must be specified correctly in the settings, and the tariff must allow connection to the network.

Modern phones are capable of performing a variety of tasks and greatly simplifying our lives. For example, you can use your phone to connect the Internet to your computer. In this article we will look at exactly this case.

Method No. 1. Phone as a Wi-Fi access point.

If you have a laptop or your desktop computer equipped with a Wi-Fi module, then for you the most in a simple way connecting the Internet to a computer via the phone will be the point Wi-Fi access. Modern phones can create Wi-Fi access points and distribute the Internet through them, which they, in turn, receive from a mobile operator using GPRS, 3G or LTE technology.

In this article we will demonstrate how this is done using the Android operating system as an example. First you need to open Android settings and find a section there called “Other networks”. In some cases, this section may have a different name. For example, on phones with the original Android shell it is called “More”.

In the “Other networks” section, you need to open the “Modem and access point” section (this section may be called “Modem”, “Access point”, “Modem mode” or “Connecting an access point”).

In the “Modem and access point” section, enable the “Mobile access point” function.

After enabling this feature, your phone will create a Wi-Fi hotspot. In order to connect to it, you need to look at the name of the Wi-Fi network and password. To do this, open the “Mobile access point” section.

This section will indicate the name of the access point and its password. Using this data, you will be able to connect to the created Wi-Fi hotspot and access the Internet on your computer.

Method number 2. Phone as a USB modem.

You can also use your phone as a USB modem. In this case, you can connect the Internet to your computer via your phone even if there is no Wi-Fi module. In this case, use the phone in as USB A modem is even easier than as a Wi-Fi access point. Below we will demonstrate how this is done using an Android phone as an example.

First, you need to connect your phone to your computer using a USB cable. After the phone is detected by the system, you need to open the Android settings on the phone and go to the “Other networks - Modem and access point” section, just as we described above. In this section you need to enable the “USB modem” function.

After this, your system should automatically detect the USB modem and connect. Usually, after enabling the “USB modem” function, the Internet appears on the computer within a couple of seconds.

Mobile Internet is still a fairly expensive and slow way to connect to the World Wide Web. Therefore, using it as the main Internet connection for a desktop computer is quite inconvenient.

However, there are times when there is simply no other option. For example, during a vacation trip or a breakdown of the main Internet provider. In such cases, you have to resort to using the mobile Internet. In this material we will talk about how to connect a computer to the Internet via a mobile phone.

The easiest way to connect your computer to the Internet via a mobile phone is to use the Hotspot function. Most modern smartphones have this feature.

After enabling the Hotspot function, your mobile phone will start working like , creating Wi-Fi network with access to the Internet. In order for the Internet to work on your computer via your mobile phone, you just need to connect to this Wi-Fi network.

It should be noted that using the “Access Point” function has a number of disadvantages:

Not every mobile phone supports this function. As a rule, only advanced smartphones provide this opportunity.
Using the Hotspot function drains your mobile phone battery faster.
Using the “Access Point” function leads to increased consumption of Internet traffic.
To connect to an access point, a Wi-Fi module must be installed on your computer.

Mobile phone as a modem

The second way to connect a computer to the Internet via a mobile phone is to use the mobile phone as a modem. Unlike "Access Point", this method Works with most modern mobile phones.

Since this method of connecting to mobile internet quite complex we will look at it step by step.

Step No. 1. Connect the mobile phone to the computer.

Connect your mobile phone to your computer using a cable or . After connecting, install a program to synchronize your mobile phone with your computer. This could be the Nokia Suite program if you have a Nokia phone, or the Samsung Kies program if you have a Samsung phone. If your phone came with a driver disc, install them too.

After connecting and installing all the necessary programs, your mobile phone modem should appear in Device Manager.

Step #2: Create a new Internet connection.

Once you have connected your mobile phone to your computer, you can begin creating a new Internet connection. To do this, open Control Panel -> Network and Internet -> Network and Sharing Center.

In the “Network and Sharing Center” window, click on the “Set up a new network connection” link.

After this, the “Set up a network connection” window will open in front of you. Here you need to select “Settings” telephone connection" and click on the "Next" button.

In the next window you must specify the number to dial, username and password. This data will be used by the modem to connect to the Internet. To find out your dialing number, login and password, contact your mobile provider.