Pumping station dzhileks 70 50 p. Store of climatic equipment "Alsera. Delivery to regions

Gilex 8751– a modern intelligent system for providing water supply. Performs fluid intake from various sources and its subsequent supply to the irrigation or water supply system of a country house, cottage, summer cottage. The body of the pumping part of the station is made of high-strength plastic, the hydraulic tank is made of carbon steel, which helps protect the unit from rust and has a positive effect on the service life of the unit.

Device

The pumping station is made using a hydraulic accumulator with a volume of 50 liters, thanks to which the pressure set in the system is maintained. Gileks 8751 is equipped with a practical control panel that displays the mode in which the station operates, the value of the voltage in the mains, the amount of current consumed, as well as the pressure in the water supply network. The pumping station also has a built-in ejector, a pressure control switch and a pressure gauge. An uninterrupted and continuous flow of liquid supply by the pump is ensured by an automatic power supply system. The motor of the electric pump is protected from overheating thanks to the built-in fan and thermal protector. There is protection of the station from dry running, from voltage surges in the connected electrical network. The Gileks 8751 device uses an asynchronous electric motor capable of reaching a maximum capacity of 70 liters of water per minute and ensuring its rise to a height of 50 meters. There is also a soft start function, which significantly reduces the load on the pump.


Peculiarities

Soft start, anti-corrosion protection, automatic operation, uninterrupted operation, overheat protection, built-in ejector, dry run protection, control panel, voltage surge protection.

Special pumps will help to normalize the situation, which:

  • contribute to an increase in pressure in the pipeline;
  • automatically turn on and off as water is consumed;
  • automatically maintain technological parameters that meet the standards;
  • create comfortable conditions for consumption;
  • provide uninterrupted water supply to city apartments, cottages, cottages, farms, etc.

The following signs indicate the need to install a pump:

  1. Not desired pressure in the manifold at the distribution manifold.
  2. There is an interruption in the flow during certain periods of increased loads (the problem is relevant for the upper floors of apartment buildings).
  3. Measurements show that different pressures are observed at different points in the network.
  4. Household appliances (washing and dishwashers, water heaters) works intermittently, software errors regularly appear on the display.

The device and features of the pressure booster pump

The design of booster pumps depends on the model and includes:

  • electric motor;
  • pump part (casing, flow block, impeller);
  • connection units (outlet and inlet fittings, drain and filler holes, hose, terminal blocks, electric cable);
  • control and monitoring units (pressure gauge, relay, automation unit, etc.).

It is also possible to have a hydraulic accumulator (it softens the water hammer at the time of launch and increases the service life).

The equipment is connected to the facility's water supply system. If the network parameters reach unacceptable values, the pump starts and the pressure gradually increases to right level. The pressure increases due to the rotation of the impeller. At the same time, both continuous operation and switching on as needed is possible. Also, pressure boosting pumps are used to supply water from wells, wells, open reservoirs, tanks.

Types and features of booster pumps

Pressure booster pumps are available with a wet or dry rotor. The former are more compact and do not make as much noise. They do not require service, as the lubrication of the rubbing parts is carried out by the pumped liquid. Of the shortcomings - low productivity. Equipment with a "dry" rotor has its own air cooling system. The devices are characterized by increased efficiency and can be used for several points of water intake at once. Of the minuses - noise and the need for regular maintenance.

In addition to the above, pressure booster pumps differ in the type of control. The device can be started manually in case of pressure decrease or switched on automatically. In the latter case, the operating comfort is significantly increased.

The company "JILEKS" sells two types of booster pumps:

  1. Surface. They are started manually, and when understaffing - automatically. Effectively combine the advantages of centrifugal and self-priming equipment.
  2. Pressure booster pumps. The increase in head power in the system occurs without user intervention. A special automation unit is responsible for this. The factory settings of the relay are optimal for shutoff valves and household appliances. The package may include a horizontal hydraulic accumulator with a volume of 14-50 liters.

You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having placed an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of prompt delivery and receive products today.

Delivery to the entrance (check with the manager about the possibility of raising to the floor)

Delivery is made daily from 9 am to 9 pm including weekends and holidays.

Specify exact terms of delivery at the manager!

Pickup points

Delivery cost in Moscow and the Moscow region:

  • Within the Moscow Ring Road - from 0 to 500 rubles, (Individual shipping cost is indicated in the product card)
  • Outside the Moscow Ring Road up to 10 km - 700 rubles,
  • Outside the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
  • In the regions, delivery by a transport company (calculated individually).

Shipping cost for

km from MKAD

700 rub.

Unloading of bulky goods is carried out by the forces and means of the customer.

Money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to its simplicity and convenience of calculation.

Payment bank card courier upon receipt

Couriers have a portable bank terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).

Payment by credit card on the site

To select payment by bank card on the "Cart" page, select the item "Payment by bank card on the site".

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:


After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter the full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making Internet payments at the bank that issued the card.

This site supports 256-bit encryption. Privacy Reported personal information provided by OJSC "Sberbank of Russia". The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, interest is not charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work on common system taxation with VAT. Delivery of goods is carried out after the receipt of funds to the account of the company "Teplovod-Service". This method is used in the calculations of legal entities.

Our details

    Society with limited liability"Teplovod-Service"

    OGRN: 1105003006162

    TIN: 5003088884

    Checkpoint: 500301001

    BIC: 044525225

    Bank: PJSC Sberbank of Russia

    R/s: 40702810838060011732

    K/s: 30101810400000000225

    Jur. address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoye highway, 21 km., office B-6

Special conditions

    For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.

    For goods with the status "On order" over 100,000 rubles. a 30% deposit is required.

  • For any item shipped transport company, 100% payment is required.

Gilex 4756– automatic surface pumping station with a built-in hydraulic accumulator with a volume of 50 liters and an automatic control system. Performs the function of taking liquid from various sources and its subsequent supply to the irrigation or water supply system of a country house, cottage, summer cottage. The housing of the pumping station is made of anti-corrosion steel, which allows to increase its strength and protect it from rust, as well as extend the service life of the product. Gileks 4756 is completely ready for use from the factory, and does not require special maintenance in its operation.

Device

The Gileks 4756 pumping station has a built-in ejector, a pressure control switch and a pressure gauge. The Gileks 4756 device uses an asynchronous electric motor with a power of 1100 watts, it is able to achieve a maximum performance of 70 liters of water per minute and ensure its rise to a height of 50 meters. The built-in ejector is able to ensure the ideal suction of the liquid at the inlet and create an increased pressure at the outlet. An uninterrupted and continuous flow of liquid supply by the pump is ensured by an automatic power supply system capable of turning the pump on and off to maintain the set pressure in the system. The motor of the electric pump is protected from overheating thanks to the built-in fan and thermal protector. There is protection of the station from dry running, from voltage surges in the connected electrical network. Stable mount-legs on the body of the unit allows you to securely fix it for work.

Peculiarities

Stable mount-legs, automatic operation, thermal protector, uninterrupted operation, overheating protection, built-in ejector, dry running protection, anti-corrosion protection.

The online store of climatic equipment "Alsera" is pleased to offer its customers high-end equipment from leading foreign and domestic manufacturers. The goods presented at us are capable to make your life comfortable, and the house - cozy.

What do we offer:

  • quality service;
  • a wide range of goods;
  • only certified equipment;
  • optimal prices;
  • products High Quality;
  • the ability to shop without leaving home;
  • delivery across Russia, Kazakhstan and Belarus.

Product range

Sale of climatic equipment is one of the leading activities of our company. In the catalog you can find the following products:

  • water heaters - we have flow-through, storage and gas models;
  • air conditioners - you will find the most different types these devices: split systems, window, ceiling, floor, column, cassette;
  • infrared heaters - these devices will quickly create a comfortable temperature in the room; in our assortment there are electric, gas and diesel models of devices;
  • submersible pumps - you can choose between vibratory and centrifugal models;
  • convectors are safe devices for space heating;
  • thermal curtains - create a comfortable temperature at the entrance to the room: in summer they keep it cool, and in winter - warm;
  • heat guns - powerful air heaters, characterized by high performance, efficiency, quiet operation, as well as environmental safety.

In addition, we have presented useful little things that will make your life easier; among them:

  • wall mounted liquid soap dispensers liquid soap in cans of 5 liters;
  • sheet paper towels;
  • dispensers for sheet towels;
  • toilet paper dispensers;
  • hand dryers;
  • urns.

How to make a purchase in the online store

It will not be difficult to buy climatic equipment in Moscow with us. To do this, select a product, place it in the "basket" and place an order, and then wait for a call from our specialist to clarify the details. All products purchased from us can be delivered to the address you specify in as soon as possible. For your convenience, next to each product, we have placed its detailed description, photo and indicated the cost. All the climatic equipment presented by us can be bought both wholesale and retail.




Top