Bird feeders: instructions, photos and original ideas. How to make a bottle feeder Bird feeder from a 1.5 liter bottle

Birds living in wildlife, protection and care is needed. It is especially difficult for them during winter: when it is frosty outside, it is so difficult to find shelter and food.

That is why caring people try to feed our younger “brothers” as much as possible. One of the ways that will not only help birds, but also decorate your garden is a feeder made from scrap materials.

In this article we have collected some of the most available options– focusing on descriptions and photographs, using already unnecessary items (plastic bottles or old dishes), you can easily arrange a place where flocks of birds will gather.

Material selection

After assessing the resources you have to create a feeder, you can choose an idea you like. However, it is worth remembering that not only its appearance, but such practical characteristics as stability.

That is why a good feeder must meet the following requirements:

Wear resistance and durability. Preference should be given to wood or plastic that can withstand weather conditions, without getting wet from rain and snow, without collapsing under gusts of wind.

In addition, the birds themselves often cause damage to the feeder - in search of crumbs, their beaks and claws scratch and tear fragile materials.

Proper size. Remember that if you cut out a small feeder, for example, from tetrapack, then large birds They won’t be able to eat from it, and the little ones will start fights for space and shake out the food on the ground.

No sharp edges, protruding nails, etc. Birds are very delicate creatures, their feather protection and the skin on their legs cannot prevent cuts from sharp objects, so make sure that your feeder is not dangerous for them, especially if it is made of glass, plastic or planks!

Location and installation

Choosing the right location is extremely important!

Having chosen the most suitable position from the point of view of landscape design, evaluate:

Accessibility for birds. Perhaps the feeder will be closed from them by thick branches, or, conversely, it will be too open, and then, in a strong wind, the birds simply will not be able to get close to it.

Difficulty for cats. These animals are excellent hunters, especially those who live in villages and holiday villages. They are stronger, faster and more dexterous than their domestic counterparts, and therefore, sneaking up to the feeder, they can cause great damage to the bird community.

Ideas for making your own feeder

Exists huge amount various types feeders - it all depends only on your imagination and available materials.

We will try to consider both the simplest and most original ideas.

House made of wood or plywood

Despite the apparent complexity, such a structure can be assembled with unnecessary boards, pieces of wood, glazing beads, plywood and, of course, special glue or nails.

Pay attention!

The base should be a heavy, flat board. To make the walls and roof, you may need a drawing, however, you can get by with an eye.

A wooden bird feeder, depending on how much attention you pay to it, can become not only a place for birds to feed, but also an elegant decoration for your garden.

Feeder made from plastic bottles

This type of feeder is very easy to make and is perfect if you decide to involve children in the creation process. You need to cut one or two holes in the bottle so that you can not only pour in the food, but also access it without difficulty.

Of course, you should try to ensure that the cut edges come out neat and not too sharp (in addition, it is advisable to cover them with tape).

If you are using a small bottle (1.5-2 liters), then you can do it in two ways: cut a square or rectangular hole in the bottle, or prefer a U-shape so that you can bend a piece of plastic and make a visor.

In the event that you decide to use a large bottle (5-6 liters, in which drinking water), you can make a large side cutout. This will not only provide more food, but also give the birds room to maneuver.

Pay attention!

To prevent the wind from ruffling a light bottle, it is worth placing a stone or a piece of brick at the bottom. This also applies to the next type of feeder.

Bird feeder made of tetra pack

You can also use juice or wine boxes to make a bird feeder.

To do this, you should follow the same technology as in the previous case: mark the location of the cut, cut it in shape, glue tape (or adhesive tape) along the underside of the opening, then make holes for a strong rope in the upper part of the tetra pack. All that remains is to hang the feeder in the place you choose.

Shoe box feeder

The cardboard from which the shoebox is made cannot be considered a durable material, but it is quite resistant to moisture, and if it is frosty outside, such a feeder can hang until spring.

The technology for making the feeder, as in previous cases, is also very simple: make four to six holes for the rope, slits on the sides and put a weight on the bottom for stability.

Pay attention!

Other options

The above options are extremely popular - such feeders can be found at any dacha. If you want to make a unique feeder with your own hands, you should take unusual materials, for example, old tableware: a cup and saucer.

In the autumn, you can cut out a product from a pumpkin or zucchini; in the winter, halves of an orange, peeled from the pulp, are suitable for this. Such feeders will surprise your neighbors and will undoubtedly decorate the garden!

Photo of a DIY bird feeder

With this lifehack you will find out how to make a feeder out of plastic bottle 5 liters, 4, and 1.5-2.

Often for children in older groups kindergarten or in primary school schools ask to make a house for birds for the winter and the easiest and cheapest way to do it DIY feeder for tits made from plastic bottles, but there are also important nuances in this matter, which we will talk about further.

Bottle bird feeder

First, let's take a step-by-step look at the most common options, and then we'll get to the automatic versions. Our main goal is not just to create a beautiful craft, but also a functional, convenient one. make a bottle feeder for birds which you need wisely.

5 liter bottle feeder for birds

For this we need:

Five-liter plastic bottle for feeder, rectangular, preferably with a stopper and, if you’re really lucky, then with a handle on the neck.

Scotch tape or tape

First, take the bottle and cut out windows on four sides. Their height can be about 15 cm, width about 10 cm, or simply step back 2-3 cm from the edges of the bottle so that several birds can fly into one entrance at once and the windows should be located 1.5-2 cm from the bottom of the bottle, otherwise It will be inconvenient for the birds to fly out. An example of a window below:

We make such holes on two or all four sides. Next, you need to cover the cut edges of the bottle with insulating tape to prevent injury to the birds.

The next step will be to create a mount with which feeder from a 5-liter plastic bottle You can hang it on a branch, for example. If you have a bottle with a handle, then simply tie a cord to it in the form of a loop. If there is no handle, then first, with a hot awl or nail, in the center of the lid, so that the double rope passes without problems, we make a loop from the lace and tie the two ends into a knot. We thread the loop through the hole in the cork, and the knot prevents the skin from falling off.

If desired, you can decorate our 5L bottle feeder, but this is all at your discretion. About the same can be made from a four-liter bottle, just the scale will be slightly different.

DIY bird feeder from a 1.5-2 l bottle

For this we need:

One and a half or two rubles ( plastic bottle for tit feeder)

Household cord 5-7 mm - 0.5 meter

Scotch tape or tape

Stick, Chinese type 1 pc.

Matches or toothpick

Threads

We start with a bottle, or rather, we cut out windows on both sides, opposite each other, 5-7 cm wide and 10-12 cm high, then we retreat the bottom 2-3 cm. It is important that we will not cut out the window completely, but only from three sides, so we will form a visor. It looks something like this:

Then we make through holes under the windows for the stick, which will pass through the bottle. This is a kind of perch. Holes can be made using a hot awl or nail. Then just stick the stick in.

Now we create a visor, for this we make holes with needles, as indicated in the picture, and then bend the cut out windows up. We take a thread and tie one side to a match, thread it through the hole on the bottle, and thread the other end into the hole on the visor and set up our improvised visor, then tie it to the match in the same way. We carry out the same procedure with the second window.

Now we make a hole in the lid with a hot nail or an awl and thread a lace loop through it.

That's it, we made a feeder from a plastic bottle 1.5 liters. Let's move on to the last scheme, in which we combine a feeder from two bottles.

Automatic feeder made from a plastic bottle

We have already learned how to make a feeder from a 5 liter bottle, but here we will need more than just that:

One 5 liter bottle, make a feeder, or rather its basis, we can use it.

One one and a half liter bottle (this is our dispenser)

Household cord 5-7 mm - 0.5-1 meter

Scotch tape or tape

We take our five-liter bottle and make two windows opposite, as shown in the figure, and also make small slits on the sides of the window. We will explain the unusual shape further.

Now we take one and a half rubles. We will have it inside the five-liter container, with the neck down, and the bottom tightly resting against the neck of the container, but for this, the bottom 1.5 must be cut to size (it is better not to rush with this matter and measure as carefully as possible).

When we have measured and cut everything perfectly, in the neck of the one and a half, right at the place of the thread, we cut two small windows, opposite each other (it is better to do this with a hot knife). The food will leak through them.

Now, using a cord and a 5L cap, we make the fastening that we described in the first diagram.

Don't forget to cover the edges of the windows with tape or insulation.

We assemble our design: through the window in Pyatina we insert a half-barrel with the neck down, bend the window and insert it into the side slots, this creates a visor, then we pour in 1.5 grains, and through the holes in its neck it fills the bottom of the feeder, screw on the lid and hang it on a branch (just choose something stronger).

Now you know how to do it DIY bottle feeder. We tried to include as many variations as possible in the diagrams and you can not just follow the instructions, but choose the most suitable, the best of all and create your ideal feeder. In fact, there are many more methods and materials for bird feeders, and we will definitely talk about them on the pages of our website, so subscribe to our VKontakte group and follow the news.

Finally, a few video instructions for making feeders from plastic bottles.

A very easy feeder is made step by step from a large 5 liter plastic bottle or canister and twine. The craft will not take much time, and it will be useful not only for sparrows and tits - you will be surprised how many different birds, sometimes completely unfamiliar to us, will flock to the treat.

In the process of making bird feeders, you can use absolutely any materials. This can be wood, cardboard, foam and plywood. But the easiest way to make a bird feeder is from a plastic bottle. Even children can be entrusted with making such a simple but original design. They will cope with this task without any doubt.

In the process of making bird feeders, you can use absolutely any materials.

The process of creating a feeder is not at all complicated and quick. This requires the bare minimum of materials and time. The design takes on a very unusual look and will look ideal both on a personal plot and in a school yard. It can be made from either a liter or larger bottle.

What is needed:

• plastic bottle;
• brush;
• acrylic paints;
• scissors;
• strong rope or wire.

Work progress:

1. Cut a hole of the required size approximately in the center of the bottle.
2. Use paints to paint your future feeder, coming up with your own patterns and combining colors.
3. Leave the product for a while to allow the paints to dry.

Fix a wire or rope in the upper part, with which the structure will be attached to the tree.

Gallery: bird feeder made from a plastic bottle (25 photos)

How to make the best bird feeder from a plastic bottle (video)

Bird feeder made from a 5 liter plastic bottle

It would seem that what could be more primitive than an ordinary five-liter plastic bottle, but you can also create a real masterpiece from it. The finished product looks so perfect and original that you can’t immediately guess what it was actually made of.

What is needed:

• 5 liter bottle;
• white facade paint;
• stationery leather;
• twine;
• felt-tip pen;
• brown spray paint;
• varnish (colorless);
• sponge;
• gouache paints;
• hot glue;
• spruce branches;
• beads.

It would seem that what could be more primitive than an ordinary five-liter plastic bottle, but you can also create a real masterpiece from it

Work progress:

1. Using a felt-tip pen, mark future arched holes on several sides of the eggplant.
2. Carefully cut out these holes along the contour.
3. Using a sponge, apply white paint to the outside of the workpiece and wait until it dries.
4. Apply a second coat of paint and wait about an hour.
5. From the pieces of plastic remaining from the eggplant, cut out parts similar to tiles and paint them first with white paint, and then tint them with brown.
6. Glue the bottom row of tiles to the top of the workpiece.
7. Place the next pieces exactly above the joints of the ones preceding them.
8. Use twine to decorate the lid and handle.
9. Glue string in a circle at the bottom of the structure.
10. Use spray paint to give the top a more polished look.
11. Shade the edges with white paint.

Additionally, decorate the feeder with spruce branches and beads, and then coat everything with varnish.

Beautiful bird feeder

To make such a feeder, you will need several bottles of different sizes at once. And the process of its manufacture is not so simple. But the result is a truly beautiful, unusual design that can become the main decoration of any summer cottage.

What is needed:

• 1.5 and 2 liter bottles;
• soldering iron;
• scissors;
• paints (aerosol);
• hot glue;
• wire;
• glue "Moment";
• furniture stapler.

What to do:

1. Cut the bottoms from three two-liter eggplants and burn their edges with a soldering iron so that they become curly.
2. Make small holes in the center of each part, and then assemble all the elements onto the wire.
3. Cut off the top of a 1.5 liter container and use it as the very top element of the structure.
4. Connect all these parts with wire and secure in several places with hot glue.
5. Cover the entire structure with paint.
6. Blend white paint along the edges.
7. Cut a small hole in the bottom of a 1.5 liter container and also singe it with a soldering iron.
8. Paint this part with spray paint, and shade white around the perimeter of the hole.
9. Connect all elements with a stapler.

Cut thin strips from green plastic and glue them with Moment glue, creating a semblance of grass.

Feeder with stands: step-by-step instructions

Just a few simple details make this design special and as bird-friendly as possible. They don't have to fly into the feeder at all, thanks to the stands made of wooden spoons.

What is needed:

• eggplant of any size;
• wire;
• ruler;
• scissors or stationery knife;
• a pair of wooden spoons.

Just a few simple details make this design special and as bird-friendly as possible.

Work progress:

1. Using a ruler, measure fifteen centimeters from the bottom of the eggplant and at this height make a through hole into which the spoon will be installed.
2. A little higher, but at a different angle, make another similar hole for another spoon.
3. Insert spoons into prepared holes.
4. On the wide side of the spoon, make the hole a little wider so that the grains spill out and it is convenient for the birds to peck them.

Tie the neck with wire and immediately secure it to a tree branch.

Ice bird feeder

To make this feeder you will also need an eggplant, but at the same time end result it will not be needed. At sub-zero temperatures, such a design will be a godsend for feathered friends. For the warm season you will need a more reliable product.

What is needed:

• five-liter eggplant;
• liter bottle;
• branches of coniferous trees;
• seeds and berries;
• water.

At sub-zero temperatures, such a design will be a godsend for feathered friends.

Work progress:

1. Cut the bottom off the eggplants.
2. Pour water into the larger diameter bottom, lay out twigs, seeds and berries.
3. Place a smaller bottom in the center of the future feeder so that the final product takes the shape of a ring.
4. Place a weight in a smaller container so that it does not float.
5. Also place the ends of the rope into the water, which will be used for subsequent fixation of the structure.

Place the workpiece in the freezer for at least twelve hours, then remove the plastic parts.

Bird feeder house

To create an incredibly beautiful house that acts as a feeder, you will need the simplest and most affordable materials. With their help, it is possible to create an unusual and colorful decoration for a personal plot.

What is needed:

• 5 liter eggplant;
• wooden stick;
• gray fabric;
• scissors;
• glue;
• whitewash brush;
• figurines for decoration.

Work progress:

1. Cut a hole on one of the walls of the container.
2. Just below this hole, make another one, but this one will be through and smaller in diameter.
3. Stretch a stick through the through hole so that the birds have something to sit on.
4. Cover the entire eggplant with fabric, leaving the hole open.
5. Fix the brush on top, thereby forming the roof of the house.

Additionally decorate the structure with figures.

Do-it-yourself bunker bird feeder in 10 minutes (video)

You can make incredibly beautiful bird feeders from the most ordinary plastic bottle. This material is accessible and easy to work with, which is why it began to be used so widely as decoration for summer cottages. A little imagination and a minimum of costs are necessary for a new and unusual feeder.

(1 ratings, average: 3,00 out of 5)

Bird feeders in winter period help save birds from hunger. However, this is not the only reason why it is worth making them.

The beautiful and original feeders themselves can become a unique decoration for your garden.

And the process of their creation instills in the younger generation a sense of responsibility and care for weak creatures.

In addition, this is invaluable time, which allows parents to spend time with their children with interest and benefit.

Wooden bird feeders

There are several types of feeders that can be made from wood. Firstly, these are feeders that look like a base made of plywood or other similar material with sides along the edges that prevent treats for birds from falling apart.

Most often, such a structure is suspended from a tree branch on thick ropes.

But such a feeder has a number of disadvantages. The most obvious thing is that this design does not in any way protect the food poured into it from precipitation and bad weather. It is also quite light and can move or tip over in the wind.

The second version of wooden feeders looks more like a house and has a roof. In such feeders, the food is reliably protected from bad weather. The base of the structure looks the same as in the first version, only there are supports on it that support the roof.

The roof can be either straight or pitched. Any child can make a straight roof, because essentially it is a rectangular piece of plywood, only slightly larger than the base.

A pitched roof has a slightly more complex design, but it the better that, unlike a straight roof, snow does not accumulate on it and does not have to be cleaned periodically.

There are also original options feeders made of wood. For example, a feeder can be made from an ordinary log. To do this you will need a chainsaw, a chisel and a hammer, as well as a chain and rings for hanging.

To begin with, you need to saw off two round pieces of wood on both sides of the future feeder. Then a wedge is cut along the entire log, and longitudinal and transverse cuts are made, not reaching the bark by about 5 centimeters.

This is necessary so that later it will be easier to remove the middle from the workpiece with a chisel. After all the work is done, the previously cut round pieces are nailed on both sides of the feeder.

All that remains is to screw in the rings and attach a chain on which you can hang the feeder.

Feeders made from plastic bottles

Plastic bottles are also used as feeders to feed birds. These can be either 5-6 liter containers or small 1.5-2 liter bottles.

Most often, a plastic bottle is turned into a feeder by cutting out several windows in the body.

Then such feeders are hung horizontally or vertically, depending on the design. For the convenience of the birds, cross perches are installed near the bottom of the feeder.

But sometimes you can find quite original feeders that provide automatic addition of feed. These are the so-called bunker feeders.

Such a feeder can consist of two wooden spoons inserted at an angle into through holes in the bottle. Thus, food from the bottle will gradually pour out onto the spoon.

A bunker feeder can be made from a 2-liter bottle. To do this, just cut the bottle in half, make round holes in the bottom, and turn the top over and place the neck down. The top can be covered with a lid or a disposable plate. You won’t need to add food to this feeder for a long time.

Useful materials for making bird feeders

The simplest feeder you can come up with is a garland of rowan, cone or berries. A treat for birds strung on a rope will decorate young trees in the garden. The only disadvantage of such a feeder is that as the food is eaten, the garland loses its appearance.

An interesting solution would be to make a feeder in the form of lumps of grain or seeds. Such decorations can be placed on benches, tables, or simply hung on trees in nets, in which tangerines are usually sold in stores.

They are based on fat or gelatin. The lard is melted and the main food is added to it. Then the finished substance is poured into molds (these can be baking dishes or regular balloon) and placed in a cold place to harden.

The same goes for dissolved gelatin mixed with grain.

If you have coconut shells lying around idle, then they can also be used to make a feeder.

As a result, such a design will be invisible on the tree. Juice or milk boxes are also suitable for making feeders. Their design itself will not differ much from simple feeders made from plastic bottles.

Photos of bird feeder ideas

Do you have a lot of 5L water bottles left over? You don't know where to put them? Maybe throw it away? Don't rush into a decision. This container may be useful to you.

Not only can you make various decorative elements from plastic bottles, but a 5-liter bottle will help you solve the problem of feeding both domestic and free birds. A feeder made from a 5 liter plastic bottle will be original, simple, but at the same time effective.

In this article we will look at options for making feeders. In addition, you will learn how to make a bee feeder. We want to assure you that there is nothing complicated in the work, so you just need to act.

Simple feeder

The first option is the fastest and easiest. This is an effective bottle bird feeder. The work is so simple that even a schoolchild can handle it. This is the advantage of plastic crafts. To make them, you don’t need to have a wealth of knowledge, expensive tools or a lot of time. Here's a list of everything you'll need:

• 5 liter bottle;
• rope;
• stationery knife;
• awl;
• scissors;
• scotch.

All this is very easy to find at home. So what is your task? To begin, find a comfortable place where you can work. And then it’s all a matter of technique:

Advice! For this work, you can ask your children for help. They will be happy to do this business.

Just like that, you can quickly and easily make a bird feeder from a plastic bottle. It will take you about 20 minutes to do everything. This is quite a bit, but the benefits will be significant. The exact same feeder can be made for chickens, but you need to cut it differently. It should be placed in an upright position and simply cut off the top part, leaving 3-5 cm sides at the edges. Now all you need to do is pour food into the chickens.

Automatic feeder

Using a similar principle, you can make an automatic feeder that does not need to be replenished frequently. It is slightly modernized, and to create it you need to take another bottle, only 1.5 liters. It will serve as a dispenser. As for the set of tools, it is identical.

So, the essence of the work does not change. The first preparation is made according to the same principle and with the same actions. You can make 4 windows, 3 or two, it’s up to you. As usual, it is better to insulate the edges. Having such a preparation, we can make the feeding process automatic. To do this, you only need to correctly cut the 1.5 liter bottle. Its bottom needs to be cut so that it fits inside a 5 liter bottle. In this case, its neck should rest against the bottom of the 5 liter bottle, and the top should be under the neck. So, you can replenish the dispenser by opening the lid and pouring food into it.

The neck of a 1.5 liter bottle needs to be cut so that the millet seeps to the bottom as it is eaten. To do this, vertical cuts are made and part of the neck is removed. This way, the contents will flow from the dispenser into the bottle. All that remains is to secure the structure and install it in the right place. In the old fashioned way, the product can be further decorated.

Making a feeder for bees

If you are a beekeeper, then feeding bees is also familiar to you. Thanks to the same 5 liter bottle, you will have a practical bee feeder. This is a simple and economical option. It will take a record time to create the product - no more than 5 minutes. Surprised? It's all about simplicity of design. What do you need to do?

1. Take a nail and heat it on fire. It should form holes 1.5 mm in diameter in the bottle.
2. Step back a few cm from the bottom and start making holes. The more there are, the more bees can eat at the same time. The consumption will accordingly be higher.
3. If you made a little extra, then seal them with tape.
4. Immediately before installing and pouring syrup, cover absolutely all holes with tape.
5. Now all that remains is to install the bottle in the hive and remove the tape. Due to physical laws, the syrup will not leak out of the bottle, and the bees will be able to feed on it.

If a 5 liter bottle is too much, you can use a 1.5 liter bottle. The essence is the same, so the principle of operation does not change. Everything is very simple and not ordinary. And thanks to this feeder, your bees will always have access to food. You will notice that all you need for the job is a nail and the bottle itself.