How to increase the speed of Wi-Fi (Wi-Fi) connection - practical tips and recommendations. Router price and why so expensive

It is believed that the era wired internet leaves. In recent years, according to statistics, Internet users are increasingly giving preference to wireless Internet. Key Benefits wireless Wi-Fi networks are coverage area, convenience, and of course speed. However, if the first two points are indisputable, then the speed of Wi-Fi networks does not always outperform LAN - sometimes users do not get the download speed stated in the contract with the provider, which is attributed to a whole host of factors: the poor quality of the router, the its incorrect location. How to increase Internet speed in this case?

Make sure that it is the router that is to blame for the drop in Internet speed. To do this, temporarily unplug it and connect the network cable instead. Measure the speed of both before and after turning off, and compare.

To find out the current Internet speed, you can use the online resource Speedtest.

Change your energy saving settings

Step 1. First login to . To access the settings, with the router turned on, enter the IP address in the browser: 192.168.1.1, or 192.168.0.1.

Important! On back side You can find out more precisely about the router, and also see the login and password (admin/admin), which you will need in the future (in fact, the password, login, and IP address are standardized, but it never hurts to double-check).

Step 2. After this, a window with two sections will pop up. Enter the same username and password and click “Login”.

After this, the settings menu will open.

Step 3. Now go to the energy saving settings, which in tp-link model routers are designated as “Transmit power”. This parameter is responsible for the strength of the transmitted Wi-Fi signal.

Move the router to a more suitable location

The central part of the apartment is best suited for placement, but you can also use special software to determine the place where the signal passes best (Ekahau Heatmapper for Windows).

Instructions for using Ekahau HeatMapper:

1. Visit the official HeatMapper website: https://www.ekahau.com/products/heatmapper/overview/. Click "Download" with the left mouse click.

   

2. Fill out the registration form, left-click on the “Submit for download” button.

   

3. 

4. Left-click on the “Download the File” button.

   

5. Go to the “Downloads” of the browser through the settings menu by clicking on the three dots icon and click on the “Downloads” item.

   

6. Left-click to launch the downloaded installation file of the HeatMapper utility.

   

7. In the installer window, left-click the mouse and click on the “Next” button.

   

8. Then click the “I agree” button, accepting the terms of the license agreement.

   

9. Next, click on the “Install” button and wait until the installation process is completed.

   

10. After installation, click on the “Finish” button.

    

11. After launch, prepare a map of the room and click on the “I have a map image” button. If you don’t have a floor plan, then click “I don’t have a map image” and the program will create part of the map itself.

    

    

12. Upload the plan into the program.

    

13. Expand the plan by clicking on the side arrows.

    

14. Using the left mouse button, draw a diagram of the proposed points for the router.

    

15. When you finish drawing, right-click and a diagram of the router's location will appear.

    

    

16. Radio field intensity and wireless location local network are displayed as follows: the closer to green the stronger the electric wave, the closer to red the weaker the electric wave.

    

    

17. Place the router in the location that the program will select for you and plug it into the network.

Eliminate PC CPU Interference

Often the operating frequency of the laptop and the operating frequency of the router coincide, which leads to interference. To eliminate them, you will need a portable Wi-Fi module. This will reduce interference and increase signal strength.

Update your router firmware

In some cases, it is necessary to update the router firmware to stop the signal delay.

Switch to a free channel

You can also switch to a freer communication channel, because when you first configure the router, the least loaded one is automatically selected. But over time, it can load more and more, neighbors can connect to it, which means this can affect the speed of the Internet. Therefore, you should simply switch to another channel. Use WirelessNetView (Windows) to do this.

1. Enter “download WirelessNetView” in the search bar of any browser and follow the first link.

   

2. Left-click on the “Latest Version” button.

   

3. In the next window, left-click on the “Download” button.

   

4. Go to downloads by clicking on the corresponding icon in the upper right corner, hover your mouse over the downloaded file, click the “Open” button.

   

5. Launch the installation file by double left clicking the mouse.

   

6. The utility will open automatically, you will see the main program page with an intuitive interface. Simply select the desired channel, double-click and confirm the transition. This way you will change the channel to a less busy one.

   

Increasing WiFi speed by changing the settings of the router itself

Step 1. Switch Wi-Fi to the 802.11 N standard. To do this, go to general network settings and in the “Mode” select “11n only”.

Step 2. Next important point: Enable WPA2-PSK security technology with AES encryption.

Note! WPA2 is generally enabled by default in modern routers, but there are exceptions.

So this can be checked. Follow this path:

Step 3. In this section, you also need to enable WMM mode so that the Internet speed is higher than 54 Mbit/s. Just check the appropriate box in the “Activate WMM” item by going to the “Wireless Mode” section, then the “Advanced Settings” subsection.

Step 4. WMM still needs to be activated for your device. To do this:

1. Go to "Network and Sharing Center" shared access", right-clicking on the network icon and selecting the appropriate item.

   

2. Go to the “Change adapter settings” menu by left-clicking on the item.

   

3. From the list that appears, select the Wi-Fi adapter, right-click on it and then left-click on “Properties”.

   

4. Click on the “Configure” option in the “Network” tab.

   

5. In the settings, open the “Advanced” item, in the “Property” tab, find and left-click the “WMM” item, set it to “Enabled”.

   

This is all. The speed should be at a normal level.

How do security standards affect Wi-Fi speed?

Router security standards allow you to encrypt and transfer all data passing through the Wi-Fi environment.

Internet speed is inversely proportional to the complexity of protection, since the system takes longer to process incoming and outgoing network data, and more time is spent encrypting and decrypting these packets.

Therefore, if you need to make the most of your router’s resources, then simply turn off all protection. Of course, the lack of security standards means that you are not protected by anything at all and are open to outside penetration.

Important! To have a balanced security/speed ratio, set WPA protection as indicated above.

Improved speed by changing computer settings

If the Wi-Fi speed is low even after everything you have done, then most likely the problem is in the computer itself. Let's open the system settings and see how loaded it is.

Step 1. Open "Task Manager" by right-clicking on "Start".

Step 2. In the "Task Manager", select the "Performance" item.

Step 3. If this utility clearly shows that the network is overloaded, but you are not using the Internet, there are no downloads or anything like that, then go to the “Processes” tab.

Step 4. In "Processes", by de-tasking all processes that you consider unnecessary, close most heavyweight programs. To do this, right-click on the process and in the drop-down menu click “End task”.

Step 5. Also try removing unnecessary applications from startup. To do this, open the “Run” console by pressing the “Win ​​+ R” key combination.

Step 6. Enter the “msconfig” command in the “Open” line. This command will open the System Configuration utility.

Step 7 While in the configurator, select the “Startup” tab by left clicking the mouse.

Step 8 Eliminate unnecessary programs from the drop-down list of programs. To do this, simply uncheck the boxes of certain programs with the left mouse button, or immediately turn everything off with the corresponding “Disable all” button. After that, don't forget to click "OK".

Video - How to increase Internet speed 100 times in 20 minutes

Improved network speed after specifying the correct channel number

Note! If you are the owner of a device manufactured by DLink, or someone similar, then you may have problems finding this option and will have to look for it among other parameters.

Why is the speed through the router lower than through the cable?

The most famous Wi-Fi network standard today, WiFi-802.11 N, can perfectly transmit up to 100 Mbit/s. However, real productivity, of course, is always significantly lower, because ideal conditions never exist. In addition, when several devices are connected at once, the network speed also decreases due to the fact that they all share a common exchange point, which normally can only work with one device. Due to all these circumstances, the speed observed when connecting via cable sometimes shows better results than Wi-Fi router.

Video - Strengthening WiFi. 5 ways available to everyone

With the introduction of technology wireless internet There is no longer a need to connect a bunch of wires to your devices to provide access to the network. A standard wired connection needs to be provided only for a router - a device that distributes IP addresses to client gadgets and covers Wi-Fi in a nearby, small area. However, sometimes it may turn out that even on a modern router the Wi-Fi connection is too slow, web pages load “monstrously” slowly, you have to wait several minutes for this or that site to open, and even when you are in immediate The situation is no better if you are close to the distribution router. If you connect to a hot spot on the street or in a cafe, there is nothing you can do about it, since you do not have access to a Wi-Fi distribution device. If you set up a network at home, you can probably do something about this problem. Today we will tell you how to increase Wi-Fi speed when organizing a network in an apartment, if the current state of affairs regarding Internet access speed does not suit you, we will offer several ways to solve the problem.

What explains the slow connection speed?

Regarding the reasons for low connection, there may be several of them:

— first of all, the low quality of the equipment used. If your router is more than 2-3 years old, most likely it will not be able to guarantee you the maximum speed of providing Internet access. As you know, new devices meet completely different speed standards, and your 10 Mbit/s is unlikely to satisfy anyone today. To find out technical specifications your router, refer to the device documentation available on the Internet on the official website of the manufacturer. The number of transmitting antennas that the router is equipped with is also important. For high-quality communication there must be at least 2 of them, and this will provide a larger signal coverage range;

— low signal transmission range. The transmission range of traffic has the same relation to speed as the first point. The closer you are to the access point, the faster the speed will be, and vice versa. Buying a modern router model can also solve this problem in your favor;

- cheap tariff plan. This point is important only if you live far from large cities and your provider is not able to provide high network throughput. If your speed is at least 50 Mbit/s, then you don’t have to worry too much about this parameter;

— excessive loading of the operating system by third-party applications and penetration of malicious code. If your OS is overloaded when exchanging traffic with the server, this can be explained by excessive clutter of the system with third-party software. Remove programs you don't need through the application manager. Another likely reason is that a worm or botnet has landed on your hard drive and completely eats up your traffic. In this case, you have to take care of cleaning your PC from viruses, using one of the appropriate cleaning products (Avast or Dr.Web CureIt);

- damaged equipment. If the router accidentally falls on the floor or onto a hard surface, the device may be damaged and will need to be taken in for repairs. Damage to the distributing antenna is especially critical, since this type of breakdown has a direct impact on the quality of the transmitting signal;

- outdated firmware. Firmware is of no small importance in ensuring high speed Wi-Fi connections. Over time, developers fix major system errors and even completely change the firmware shell. So, if you haven’t updated, it’s time to think about it: the procedure is very simple and does not require any special skills.

How to increase the speed of Wi-Fi connection?

If you are rearranging your apartment, think about the range of the signal from the router. Try to install the device as close to the center of the apartment as possible so that the signal is distributed evenly to all rooms. It is worth taking into account the number of transmitting antennas on the gadget. If the router has only one antenna, high quality You can achieve this connection, after which you will need to buy a new router. It is also important to take into account the thickness of the walls.

The next rather significant nuance is to indicate the appropriate frequency of the router signal. As usual, all devices distributing a Wi-Fi signal operate on the same frequency, and in apartment buildings they simply interrupt each other’s signal. Under such circumstances, it is worth specifying the actual transmission channel number in the router settings, taking into account the network load. By default, all routers have the “Auto” parameter set.

How to increase Wi-Fi speed by specifying the actual channel number in the settings?

Log in by entering the appropriate host IP address of the router, and specifying the login and password on the pop-up form to enter the settings menu. In this manual, I will use the ASUS router control panel as an example; in your device, the sequence of actions may be slightly different.

Let's go to the settings menu in the "Wireless Network" section.

In the active category you can see the “Channel” option. Set one of the values ​​of this key so that the signal does not constantly switch from one channel to another, as was the case when the “Auto” value was set.

If you have a router trademark D-Link, TP-Link or any other brand, you may have to wander around a little in the settings to find the option to configure the communication channel here.

How to increase the speed of Wi-Fi connection by changing other parameters of the router?

To increase wireless throughput, you need to switch your network settings to the 802.11N standard. This is the fastest standard in the 2.4 MHz band, supported by all devices released since 2010 and later. Thus, in the basic parameters of the Wi-Fi connection, we force the N-mode to be set (or select the standard in the field: 802.11N).

Another important tip is to use the WPA2-PSK security standard with AES encryption. The WPA2 algorithm is the most modern and secure; it is available by default in all new routers. However, if you doubt that you are using this particular standard, it is better to check everything yourself. To do this, go to the wireless network security settings and set the encryption method to WPA2, and the algorithm to AES.

It is also worth enabling the WiFi Multimedia mode (or WMM, as it is called in the settings). This option is required if you want to get speeds above 54 Mbps. According to the QoS quality of service specification, setting this mode is also a prerequisite. You can set this mode in the advanced wireless network settings.

In addition to this, you need to activate this mode in the network adapter settings. Right-click on network connection in the taskbar and select the “Network and Sharing Center” option from the menu.

A list of network adapters installed on your laptop/computer will appear. Select the adapter for Wi-Fi connection from the list, right-click on it and select the “Properties” option from the context list.

After this, already on the settings form, go to the “Advanced” tab, find the “WMM” option in the list of properties and set the value to “Enabled”.

The last tip related to setting up a router involves using a channel width of 20 MHz. By default, the width is differentiated, i.e. varies between 20 and 40 MHz. The 40 MHz wideband option is not very suitable for apartment buildings, since the signal in them is not very strong and stable. So check the 20 MHz option and enjoy the result.

How to increase the speed of your Wi-Fi connection by playing with your computer settings?

If, after all the manipulations with the router, you find that the connection speed has not changed at all, perhaps the reason for the low connection is in the computer, and not in the router. Let's look at the system load in the OS settings. To do this, go to the task manager using the combination Ctrl+Alt+Del. Let's use the second tab called "Performance".

If the diagram shows that the network is overloaded, and you are not currently downloading anything and are not using the Internet, go to the first tab containing a list of services running in the background, called “Processes” and disable here those programs that you do not currently need .

Another useful advice, how to increase Wi-Fi speed on a laptop - disable unused applications from startup. To do this, use the Win+R combination, and in the mini-window that appears, enter the “msconfig” parameter. Go to the “Startup” tab, after which the list you need will open.

If this method does not work, we can recommend updating the W-Fi adapter drivers to the latest version. You can find the required package on the website of the laptop manufacturer, or through driver packs such as DriverPackSolution (just do not select the automatic mode, since in addition to the drivers, a bunch of browsers and other applications will be installed. Work through the expert mode).

In conclusion, we would like to suggest that you adjust the routing configuration on your PC. This can be done without any special effort and without any harm to the system. To reset the settings, run cmd mode as administrator. To do this, right-click on the start button and select the corresponding element in the context menu.

Next, in the prompt that appears, enter the request “route -f”. Don't be alarmed if your web connection goes down briefly. After that, enter the key query “ipconfig /renew” and press Enter again. If the above commands did not help, instead of the second the specified key use the command “netsh winsock reset catalog”.

Results

If you want to know how to increase the speed of your Wi-Fi connection, we hope that our article will help you achieve success in your task. Otherwise, it's time to think about buying a new router, with at least two antennas and higher speed characteristics. Thanks to support for new communication and data transfer standards, the new device can increase Wi-Fi speed by at least 2 times. To know this for sure, you need to study the technical parameters of the old and new devices and compare them.

Another article on this popular topic. Probably everyone who checked the connection speed through their Wi-Fi network, were wondering why it is so low, why the router slows down the speed, and how to increase the speed of your Internet connection. I have already answered almost all these questions in the article: . And in this article we will talk about how to increase Internet speed over a Wi-Fi network. And as far as possible.

The whole problem is that when connecting the cable (from the Internet provider, or even from the router) directly to the computer, we usually get a speed of 80-100 Mbit/s (if you have a 100 Mbit/s tariff), but when connecting via Wi-Fi, it depends. Maybe even 20 Mbit/s, or even less. If your router is not the cheapest, then the speed will be approximately 50-60 Mbit/s. But, it all depends on the specific case. And in general, the speed that a router provides over a wireless network depends not only on the router itself. There are many different factors, which I will write about later in this article.

Separately, I would like to write a few words about the maximum speed of the wireless network, which is indicated on the box of your router, or in the specifications. Many people are interested in this question. 150 Mbit/s, 300 Mbit/s, this is the maximum theoretically possible speed that the router can produce. Of course, under normal conditions such speeds will never be achieved. And this is normal, it does not mean that you have a bad router.

Why is the Internet speed slower over Wi-Fi?

I think you will agree that a wireless connection is not as stable as a wired one. And no matter how it is, a cable connection has always been and will be the most stable and reliable.

Directly, when you connect the Internet cable directly to the computer, there is a direct connection to the provider’s equipment. When we install the router, it already manages this connection. The router controls the flow, distributes the Internet to other devices, etc. This is precisely why the speed drops when connecting through a router. And especially when connected via Wi-Fi network.

How much a router will cut speed mainly depends on the power of that router. The more powerful the router, the faster it can process information, and it has a higher maximum speed flow. And the more powerful the router, the more expensive it is. And believe me, there is a difference between a device for 20 dollars and 200. Otherwise, there would simply be no expensive routers. No one would buy them or make them.

We found out why the router slows down the speed, and now we’ll take a closer look at some of the ways you can increase the speed over a Wi-Fi network. At least you can try.

Before doing anything, it would be good to connect the Internet directly to the computer and check the speed. You can check it on the website http://www.speedtest.net. There is a separate article on this topic that you can view.

If your tariff speed is, say, up to 20 Mbit/s, then you won’t be able to squeeze out any more. Therefore, we measure the speed at direct connection, then via Wi-Fi network. We will find out how slow our router is. Also, you can check with different devices that you connect via Wi-Fi. Since the speed also depends on the device we connect.

1 Let's probably start with the most working method (in my opinion). Search for a free Wi-Fi network channel and replace it in the router settings. When your devices see many other Wi-Fi networks, all of these networks can interfere with your wireless network. And because of this, connection speed often suffers.

Therefore, you can try to determine the freest channel and set it in the settings of your router. There is a very detailed article on this topic:. It also shows how to change the channel in the settings of different routers. Here, for example on TP-LINK:

Here you need to experiment, try different options. And if you already have a static channel, then set it to Auto.

2 Wi-Fi 5 GHz. If you have a lot of neighboring networks and a lot of interference that affects the speed, then best option, is to switch to Wi-Fi 5 GHz. Buy a router that supports broadcasting a Wi-Fi network at a frequency of 5 GHz. The speed will definitely be higher there. I recently wrote about one such router: . But there is one caveat: not all devices.

New phones, tablets, laptops that are already going on sale, they most likely already have support for Wi-Fi networks at the new frequency. But older devices do not support it. This can be easily found out from the characteristics. But this is not a problem, since all dual-band routers broadcast a wireless network at a frequency of 2.4 GHz. So older clients will be able to connect to it.

Not only is the 5GHz network now almost completely free of interference, but also according to the 802.11ac standard, the speed is higher than 802.11n. If at a frequency of 2.4 GHz the maximum speed is 300 Mbps, then at 5 GHz it is already 433 Mbps (for Tp-Link Archer C20i).

3 Wireless adapter drivers. This method is only suitable for computers and laptops. As I wrote above, the speed also depends on the Wi-Fi receiver that is installed in your computer. In a wireless network, the speed is always matched to the slowest device. No matter how powerful your router is, if you have an old Wi-Fi adapter on your laptop that doesn’t even support 802.11n mode, then we won’t see any great speed.

Replacing a laptop's Wi-Fi adapter is of course problematic. But, you can try updating the driver for this adapter. Perhaps it's already out new version with various improvements, and after the update we will get an increase in speed.

4 Set the 802.11n operating mode and channel width. If you do not have very old devices that do not support 802.11n, then you can try setting this operating mode in the router settings. As a rule, the default is automatic selection of the operating mode. For greater compatibility with different devices.

You can do this again in the settings of your router, which you can access according to the instructions. As a rule, these settings can always be found on the tab where the Wi-Fi network is configured. This settings item is usually called " Mode", or " Network mode". You need to select " 11n Only" (N Only), and save the settings. This is what it looks like on TP-LINK routers:

On the same page you can also change the channel width (Channel Width). You can try to put 40MHz.

Save the settings and reboot the router.

If after these settings you have problems connecting to Wi-Fi with some devices, then return everything back.

5 It is possible that your router settings have old WPA encryption method. Not only is it unsafe for protecting a wireless network in our time and is already very outdated, but it also tends to limit speed.

You need to install WPA2-PSK encryption (you most likely already have it installed). You can set the correct security settings according to the instructions. Using D-Link, Tp-Link, ASUS as an example. And in the “Setting up a router” section on our website there are instructions for other devices.

6 The closer to the router, the stronger the signal and the higher the speed. Therefore, try to install the router like this (I will enter the location) so that there is a good signal throughout your home.

And if you have a large house and the router cannot penetrate the signal to distant rooms, then you can install. Or buy a more powerful router.

7 You can try again update router firmware. In new versions of the software, things are improved and finalized. Therefore, after the update, the speed on the Wi-Fi network may increase. We have instructions on our website for all popular manufacturers. I give a link to the instructions, and instructions.

8 Also, do not forget that the more devices are connected to the router, the lower the speed will be. Firstly, the router will simply divide the initial connection speed between all devices, and secondly, from the load that the devices will create on the router, it will reduce the speed even more.

Afterword

Most best way The solution to this problem is to buy a more powerful and expensive router. And even better, dual-band, so that you can use the Wi-Fi network at 5 GHz and get good speed.

Well, if buying a new router is not part of your plans, then be sure to try the tips that I wrote about above. I think there will definitely be some result. Don't forget to share your results on increasing Wi-Fi speed in the comments.

Have you noticed how your Internet speed sags when you use Wi-Fi? It's annoying, isn't it? The Internet is teeming with requests and life hacks to increase speed, router hacks and all sorts of shamanism. Most of this is pure nonsense. As they say, content is for content's sake. This is done a little easier than it seems. Yes, Internet speed can really be increased using a router. More precisely, let's say this: your speed is slowing down due to the wireless Internet network distribution device itself. Or rather, due to incorrect settings.

Most people save on wiring specialists and do it themselves. Who do you think will do better? You or a master whose specialization and meaning in life ends with correct setting wireless networks? Here you go.

It would seem that it’s so difficult? Plug the wire into the router, turn it on, set a password and enjoy. But that was not the case. There are several pitfalls here, ranging from the range to the location of the router. Today we will tell you how to increase Internet speed via a Wi-Fi router. Let's go!

What determines the speed of a router? How to increase it? Watch the video and find out the answers to these questions:

Router price and why so expensive?

We are sure that you were surprised by the prices of new router models and wondered, “Why is it so expensive? The function is the same after all! They buy the cheapest one, and then Google “how to increase the speed of the router?”

Yes, they perform the same function. But the point is HOW they do it. Let's openly say that routers for 700-900 rubles will not give you any guarantee that the Internet will allow Youtube to work without delays in normal quality. Also, there is no guarantee that such devices will distribute the Internet to the next room or to the floor below.

Have you ever wondered why? Were you interested in the reason for such a low price? But it would be necessary. Such routers are made from the cheapest parts and the cheapest labor. They have very weak RAM, a weak chip, and generally everything is weak. It is not clear how to speed up such devices. It was strange to expect something extraordinary from a cheap device.

Do not be fooled by the inscriptions N150, N300. These are just inscriptions. In practice this will not have any effect. Don't save 2500-3500 rubles on a good device, it will make your life easier.

802.11N

These numbers that you don’t understand play a big role. In the usual 2.4Mhz band, this is the fastest and newest. It is supported by all devices released since 2010. It would be wise to eliminate all outdated standards. The catch is that if several new devices with 802.11N standards run on the old 802.11G standard, they will receive a weak Internet signal. Efficiency is reduced by 50-70%.

Changing the operating mode using a router as an exampleTP-LINK:

What to do?

• Open Wi-Fi settings;
• Enter your details. Typically, login: admin, password: admin.
• Go to the “Wireless Mode” section and set the N-mode to 802.11N.
• Click "Save".

Now things will go much better.

Network Security

It's time to eliminate the WEP and WPA/TKIP encryption method from new routers. They are already really old. Nobody uses them. They are cracked one-two punch. They are not reliable and always reset.

Always select WPA2-PSK. This is the best and most profitable option. Better yet, just remove the password. Yes, we'll just remove it. Why him? But it will still be a secure network. You need to register everyone who can connect to your network. This way, the chip will not be loaded with encryption, since there will simply be no encryption, and this will speed up the operation of the router.

Channel width

Since the 802.11N standard is more optimal and new, it provides for operation at a channel width of 40Mhz. Of course it's cool. But there is one BUT that simply crosses out this possibility. This is the quality of the Internet we receive.

It just so happens that 40Mhz requires a very strong and powerful Internet, otherwise such a channel width will have the opposite effect or will not work at all. Our Internet is very weak by European and Chinese standards. 40Mhz is not for us. Ours is native 20Mhz.

Free channel

Often, this is a problem in apartment buildings, where everyone has a Wi-Fi network. Your router operates on channel 3, just like your neighbor’s. Of course, the signals will intersect and interfere with each other. To avoid this, you need to choose a free channel. This is not shown anywhere, so we select it at random. Where the Internet works better, that channel is free.

We'll show you how to change the channel using a router as an example.TP-LINK:

WiFi Multimedia

This mode will help you increase the speed of your router. We enable it on our router.

Let's show it using a router as an example.ASUS:

Now go to the network control center on your computer or laptop and click the button to change adapter settings.

Select the wireless network, right-click and select “Properties”.

Click “Configure”, go to the “Advanced” menu and select the WMM mode we need.

Router firmware

Most of the routers that are currently in use are old. One might say, from the last generation. Of course, updates and new firmware have been released for them a long time ago. But who cares? It works and works. But due to old firmware, the device may transmit a weak signal or not distribute the Internet.

To flash your device, you need to download it. We go to the manufacturer’s website and open the “utilities” section. We turn the router over and look at the hardware version of the firmware. For example, it will be V7.2. We need to find the firmware that starts at V7. The higher the second number, the newer it is. Download.

Next, go to the settings of the router itself (note: the router must be connected to the computer, and the WAN network must be disabled). Enter your username and password (listed under the device itself), find the “system tools” tab and click on it. Select “Firmware Upgrade”, “browse” and select the downloaded file.

After updating the firmware, you will need to re-set the network name and password. Reboot the router and enjoy.

Tidy up your device

How long does your router stay in one place? It is likely that dust and dirt have accumulated in it. Unplug from the outlet. Open the case and go through the vacuum cleaner on low mode. But be careful. Don't break anything there.

Tariff plan

It seems that this is where we should have started. Is it reasonable that you won't get a good internet signal if you pay little for it? For example, a basic tariff of 700 rubles is PHYSICALLY not capable of distributing normal Wi-Fi to a laptop or computer.

And remember! A wired signal is, a priori, stronger than a wireless one. 3-4 times for sure. Even signal boosters can't increase the speed Wi-Fi.

Operating system load

Yes, there is a possibility, even a very high one, that your computer is simply overloaded. To increase Wi-Fi speed on a laptop or computer, press the combination CTRL+ALT+DELETE on your keyboard and launch the task manager. Go to the "Performance" tab. It will become clear to you that the OS is simply overloaded.

Close all background programs, torrents, etc. All applications that require the Internet. You will notice how the speed of data transfer and reception will increase.

The location of the router itself

Increase throughput with location. The quality of the received signal directly depends on the place where your router is located. Let you configure the router correctly, update all firmware, dance a shamanic dance and perform a special ceremony. If the router is located deep in the house, then in another part of it the signal will be very weak.

This problem is caused by the thickness of the walls, wires, electrical cables and equipment that is in the house. The best option is to install the device somewhere in the middle of the house. The Wi-Fi signal is not direct, it has a circular shape. For example, in a two-story house it would be wiser to install a signal distributor somewhere on the stairs. This way the signal will reach every corner of the house.

P.S. Sometimes it could be the router . Check it for mechanical damage. Maybe the wires have come loose. Just in case, reboot.

Update your router

Well, the very last thing. Your device may be outdated. Stock up on two or three thousand rubles and buy yourself modern device. This will save you time and nerves.

We think now it becomes clearer to you how to increase Wi-Fi speed. Open the page of your router by entering the data that is written on the device itself. Read it, it's interesting. Better yet, consult a specialist and call a specialist!

For a full overview of options for “speeding up” a computer or laptop, see the following video:

If the user is faced with the question of how to increase wifi speed, which means he will find the answers in this article. Internet visitors do not always complain about poor connection quality. 75% of them have no problems with signal quality, but the remaining 25% may not even suspect that their LAN router is capable of working faster.

If you have connection problems: the signal level is low or the router does not provide full speed at certain time intervals, after reading the material you will have a chance to enjoy the speed of wifi data transfer on your laptop or phone.

Users are often looking for speed improvements because this is due to the fact that the provider offers one wifi speed, and in the end the parameters turn out to be one and a half to two times smaller. But you shouldn’t immediately blame the communication standard or service provider; most likely, the device does not provide maximum speed.

To check whether the Internet speed depends on the router, just connect the cable directly to your computer or laptop and use a speed measurement service. For example, go to the Speedtest website, after checking it will become clear where the problem lies.

If after testing it turns out that the problem lies in the equipment, in this case you will have to go through the list, including:

• poor assembly of equipment;
• low signal level;
• incorrect settings.

The router often slows down for one simple reason: the device is cheap and physically incapable of delivering the speed indicated on the packaging. If the user is the owner of a budget router such as: Dir-320 (the entire line), D-Link, TP-Link, you should not be surprised at the “loss” of the Internet. Although modems work excellent in terms of price-quality ratio, weak processor, small volume RAM and budget network cards limit Internet speed.

Sometimes the reason for the loss of Internet speed on the router is an unfortunate location and low level of the received signal. In this case, it is recommended to place it in a different location. The signal is also affected by powerful electrical appliances or power lines located near the router.

But even if you have a weak router that doesn’t pick up the signal well, you shouldn’t be content with a constantly “dull” and “slow” Internet. The article will teach you how to increase the speed of a wifi router, and among the tips there is an option that can solve the problem with Wi-Fi.

Tips for increasing the speed of your router's Wi-Fi network

To solve problems with increasing wireless Internet speed, effective methods are presented below:

• Choosing the optimal location for the router.
• Checking settings.
• Definition of a free channel.
• Changing the channel width.
• Selecting a network security mode.
• Update the wireless adapter driver.
• Updating the router firmware.
• Transition to Wi-Fi 5 GHz.

Each item will be described and discussed in detail, so users following simple instructions, will be able to speed up Wi-Fi quickly and for a long time.

Choosing the optimal location

If the Internet speed through the router decreases, and at the same time the Wi-Fi signal is at the level of one or two bars, then it’s worth looking for another place for installation. The signal level depends on various factors influencing it, namely:

• The thickness of the walls, the material from which they are made.
• Wiring in the immediate vicinity of the modem.
• Availability of other routers.
• High humidity.

A suitable location for installing the router is the center of a house or apartment. Thus, the signal will “penetrate” all rooms, of course, with sufficient power. Gain also occurs by replacing standard antennas that are not built into the box with stronger ones.

If it is difficult to determine where the center of the apartment is, and it is also unknown whether there is interference there, it is better to use special applications. For example, WiFi Solver FDTD for Android or NetSpot for Mac. Hoatmapper is suitable for the Windows platform.

It is recommended not to install the modem near a bathroom or central heating pipes. Water affects the signal level, so if you like to shower while listening to music, you should play it on your speakers rather than on your phone in the bathroom.

Checking settings

In order to go into the modem settings, you need to enter its address in the browser. Typically this is: 192.168.1.1 or 192.168.0.1. Next, the authorization menu will open; if a password is not set, by default enter admin and admin in the “login” and “password” fields.

The first reason why the Internet speed through a router may drop is the activated energy saving mode. Most often it occurs on Asus, but the problem is solved in the same way on other models. To do this, in the modem settings you need to find the “Wireless Networks” menu, the WMM APSD line. If the “Active” mode is selected, change it to “Disabled” and save the settings.

If you are using a laptop or PC with an adapter, the power saving mode is enabled on the adapter itself. To disable it, press Win+r (the key between Ctr and Alt), insert devmgmt.mscк into the line that appears. In the new menu you need to find the item “ Network adapters" Then a list of several devices will open; you need to select the one that contains the words: WiFi, Link, Realtek or something else that indicates working with the Internet. Right-click on the line and go to the “Energy Saving” section. If there is a checkmark on it, uncheck it and save the settings.

Select a free channel

Channels are used to transmit data, acting as a “bridge” between the device and the router. If the channel is “clogged”, this is the main reason for the low Internet speed via wifi. How to determine which channel to choose. For information: on modems manufactured specifically for Russian market, 13 basic channels, on other devices – 11. The more users on one channel, the weaker the wi-fi speed. The “pollution” of the channel is affected by users connected to your modem and neighboring routers. Therefore, if within the network’s range there are several more access points transmitting over the same channel, the “WiFi” speed, as teenagers say, will be underestimated.

• Wi-Fi Analyzer for Android devices.
• InSSIDer speeds up channel selection on your computer.
• Wi-Fi explorer for iOS.

The fewer devices using the channel, the better it is.

Changing the channel width

On new modems, there is a “channel width” parameter. If such a name is not observed, there are 20/40 GHz parameters, the choice is made among them. Depending on the router channel width, the data transfer speed changes. But there is a big disadvantage of the new standard: if there are additional modems nearby that use the same channel, the Internet data transfer speed will decrease. Therefore, you should carefully select a channel that is completely free or with a frequency of 20 GHz.

Selecting a network security mode

The Internet speed through a router can drop due to the fact that someone else has connected to your network. In order to prevent this, you need to go into security mode in the router settings and select the latest standard for password and data encryption - WPA2. You need to spend a little time choosing a complex password. At any time, for example, if you forget, you can go into the device settings and reset it.

This is a special standard for those who need the Internet as entertainment. There is another name for it: wmm preamble mode. It is based on the 802.11e standard, but has its own features. Equipped with a priority scheme used to transmit data in the following order:

• voice: highest;
• video;
• ordinary;
• background: lowest.

This mode allows you to speed up the transfer of certain data and also saves battery power. mobile devices in the background.

By going into the router settings on your computer, you can increase the Wi-Fi speed by changing the wireless network mode. By default, new devices are set to automatic or standard type b/g/n. Devices are not always able to determine what type of connection they are using, and then the channel with the lowest speed is selected. Therefore, it is better to use 802.11N, the power of this signal is maximum, as is the data transfer speed over it.

Updating the wireless adapter driver

It happens that the question of why the router “cuts” the speed is not the equipment itself, but the version of the driver for the wireless adapter. For a quality connection, you must own the latest version. Updating router drivers is only possible on a laptop or computer. To do this you need:

• know the adapter manufacturer;
• find the latest driver;
• download and install the software.

To determine the type of adapter installed on a PC or laptop, the easiest way is to download special application HWVendorDetection. After installing and launching the program, information about the equipment and supplier is displayed. Knowing them, just go to the manufacturer’s website and in the “Software/Drivers” section find the desired model and download the necessary driver.

You can do it even simpler: install the DriverBooster program, it will automatically find outdated drivers on your PC and update them.

Updating the router firmware

Flashing a router firmware for the first time is a risky endeavor. If you do it wrong, you can break it. Therefore, we recommend using only a certified router. In such models, as a rule, there is a “rollback” point; in case of failure, you can return to the previous firmware version.

First, you need to download the latest firmware for the device from the manufacturer’s website. Finding the version for your model is easy using the serial number. Next, connect the router via a Lan cable directly to your PC or laptop. It is most convenient to do this procedure on an OS starting from Windows 7 and higher. Next, find the Firmware Upgrade item in the router settings, select it, specify the path to the downloaded directory, and start the firmware update process. Until the process is completed, do not turn off the router or remove the Lan cable. After restarting, the device will be ready for further use.

Switch to Wi-Fi 5 GHz

Another way to increase weak Internet speed through a wifi router is to switch to 5 GHz Wi-Fi - a new wireless method of data transfer. To do this you will need:

• buy a dual-standard router;
• have devices operating according to this standard.

The speed when switching to 5 GHz Wi-Fi increases due to two factors:

1. The standard is new, the channels are free.
2. The transmission frequency increases, so the problem of how to speed up the operation of the router is solved.

Conclusion

As is clear from the above, the speed of the router depends on many factors. For greater efficiency We recommend using several methods to improve signal quality. Some of the methods require some time; you should not rush, but approach the matter thoroughly to avoid equipment breakdown.