home › Disputes with neighbors › Weaving leather cord on an ax handle. Knife lanyard made of paracord, patterns and methods of weaving. Necessary materials and tools

Weaving leather cord on an ax handle. Knife lanyard made of paracord, patterns and methods of weaving. Necessary materials and tools

What lanyard for a knife? That's what they call special kind braided lace, which is tied at one end to the hilt of a weapon. Using it, you can make the knife more functional and aesthetic. Why exactly do you need this device and how to make it yourself, we will consider further.

Main functions

There are only two main types of lanyards:

with loop. Such a device is necessary primarily in order to prevent the loss of weapons in the event that it accidentally slips out of hands. When cutting, such a lanyard with a loop thrown over, albeit a little, but relieves the load from the brush. You can also quickly release your hand. The knife will just hang on it. If necessary, the weapon can be hung by the loop during transportation or storage. Loop lanyards for knives are among the most functional.

Drawstring or "tail". When using this type of knife, you can very quickly get it out of your pocket or case. The lace in this case is a kind of flexible continuation of the weapon itself. With wide movements, the knife to which such a device is attached behaves more predictably, as it acquires additional inertia. Another function of such lanyards is purely decorative. Sometimes they serve as decoration, for example, premium weapons.

Varieties of devices

Lanyards for knives can differ according to the method of weaving the lace. The loop can also be performed using different schemes. In addition, there are different nodes, with which the fastening to the hilt is carried out. Very often, decorative accessories are additionally hung on the cord. It can be shards, beads, etc.

What can be weaved from

Knife lanyards can be woven from just about anything. But the most acceptable option can be considered a synthetic lace. Such material will last a long time, as it is wear-resistant and does not rot. Experts advise using a round rather than a flat lace. It is desirable that its color be bright enough. If the knife falls, say, into grass or snow, in this case it will be easier to find it. Sometimes even ordinary new shoe laces are used.

Among other things, you need to choose the right length and width of the lace. These parameters will ultimately determine the size of the finished product itself. For the manufacture of a thick and short lanyard, a coarse voluminous cord about half a meter long is suitable.

Weaving a lanyard with your own hands

With your own hands, you can make a very practical lanyard for a knife.

Weaving begins with the preparation of a pre-purchased cord. Its ends should be slightly melted. In this case, the attachment to the knife will be more reliable. Weaving is carried out in several stages:

A hole with a diameter of approximately 5 mm is drilled in the knife handle. Unless, of course, it's not there in the first place. Sometimes there is a special loop on the knives. In this case, nothing needs to be drilled either.
The cord must be cut into two parts of 25 cm each. One of them is tied to the handle with a regular knot. This cord will also need to be attached to the middle of the second part. A very good solution would be to take two cords of different colors for work. In this case, much more attractive lanyards for knives are obtained.
The resulting four free ends of the cords will need to be woven into a cage. This technology is very simple. The ends overlap each other at an angle of 90 degrees. In this case, each previous cord passes under the one located in front. In the process of weaving, the ends should be tightened as tight as possible. In this case, the finished product will be more convenient and last longer. In addition, tightly woven lanyards look much neater.
Having finished weaving, you will need to tie a knot. The ends should be trimmed, cut off, and hidden inside the resulting product. Sometimes they are pre-melted. Thiso can prevent cords from unraveling. However, it is worth considering that the lanyard itself will be less reliable. The finished product can at one point simply unravel, and the laces can get tangled. In this case, the lanyard from the knife will have to be cut off.

If you wish, you can learn how to make very beautiful and practical lanyards for knives with your own hands. The technology discussed above is absolutely simple. A handy knife attachment can be made in a couple of hours.

A lanyard is a special type of weaving, which is made with a cord and is used to decorate handles of various kinds. Until today, they are used to decorate weapons of any kind, especially if they are melee weapons. In simple words, lanyard - a loop of a cable, or rope, located at the end of a saber, or other weapon. In the Russian army, the presence of such a lanyard on a soldier spoke of his special merits to the fatherland and showed that this was a distinction. Lanyard weaving can be done even by beginner needlewomen!

Lanyards were used for convenience and as a decoration for a knife, they were attached to its handle. All the items that riders used before had lanyards on their ends. Therefore, the initial function of weaving a lanyard is considered to be convenience for a person who uses this or that thing.

The secondary function is beauty. It was made as a decoration. When the owner of the weapon had free time, he could design all kinds of lanyards from various materials with his own hands. Knowing the schemes and methods of weaving a lanyard, for example, from leather, a craftsman could profitably decorate his melee weapons.

Possessing some schemes, types of weaving knots, a person is able to profitably and without problems make an ornament in the form of a lanyard, even for checkers. Let's consider some of them.

We learn the technique of weaving a lanyard with an analysis of the main types

Simple knot.

No wonder the node is called that. Therefore, almost everyone, at least once in their life, resorted to using it. It is performed by knitting first a knot up, and then inward to the first knot.

Straight knot.

When connecting the ends in a simple knot weaving pattern, perform it twice for both sides.

Simple and straight knots, adjacent in weaving technology, therefore it is not surprising that people who know how to perform the first know the basics of the second.

Lanyards are fashionable to perform in such ways as:

snake
hunting knot
Cobra
square weave
Round weave - ball
Rhombus weave.

In this article, you will see how to make a paracord lanyard using the simple knot technique.

Since paracord is one of the optimal materials for weaving a lanyard, we will use it in practice.

You will need:

Paracord or strong cord.

Yes, only this material will be needed to complete the craft. Start making the lanyard by making a simple paracord knot.

Step-by-step master - a class for doing crafts:

Find the middle of the rope.
Make a loop in this section of the paracord.
Thread the end of the rope through the loop. A simple knot is ready.
So you do simple knots, according to the right quantity for you.
Attach to the desired weapon through the hole on the handle.
Check the ease of holding this design.

If everything suits you, then the craft is ready. We will be glad if given master- class, will be useful to you.

The lanyard allows you to visually lengthen the handle, even with a short knife to apply chopping blows. This ability was convincingly demonstrated by the participants of the rope-cutting contest. This device can make the handle longer, even replace it. With the help of a lanyard, you can move and continue the reach of the knife beyond the border of its contour.

The lanyard is able not only to protect the tool from falling out, but also to free the hand, at the same time, allowing you to save fast access to the knife. Such a mount is especially convenient when working at height, in a boat, in hard-to-reach places and during manipulations associated with the need to often put down the knife and quickly take it.

However, it should be noted that each specific lanyard cannot perform all functions at once. Most often, it is intended only for the execution of any one specific task.

There are various ways to fasten lanyards. They attach it to the hilt, hilt, through a hole in the hilt itself, or through a ring, a shackle - a swivel. Each method has its positive and negative sides. For example, fastening through a ring is more compact and mobile, but fastening through a hole is simpler and more reliable, fastening through a shackle, especially if it is tight along the axis, allows you to stably orient the lanyard and quickly find it by touch. You can attach the lanyard freely, with a knot, with a clip, on a loop or secure it with a through clip, a winding of thin wire. In a word, everyone chooses the method of fixing according to taste and needs.

Lanyards are knitted from the most diverse material from a decorative cord: to a chain and birch bark, but it is believed that best material- skin.

Therefore, when doing crafts, choosing material for them, be careful after studying its characteristics. After all, working with weapons is not only fascinating, but also fraught with danger.

Video on this topic of the article

Since ancient times, people have woven, knitted, wound lanyards on their knives and bladed weapons. Sometimes it had a practical meaning, sometimes purely decorative, sometimes just a tribute to fashion.
The purpose depends on the lanyard itself. Sometimes the lanyard forms a loop that can be draped over the hand to reduce the risk of losing the knife in an emergency. On small knives, or on knives with a short handle, a thick braided lanyard can fill the void in the palm, increasing the length of the handle.

It can also be used to more conveniently and quickly remove a folding knife from a pocket or case.

Holding the knife by the lanyard and the end of the handle, you can increase the inertia of the knife due to the wrist whip, for more effective chopping blows.
It is better to weave a lanyard from a synthetic cord. Synthetic materials are more resistant to wear and friction, and do not rot from moisture. In addition, the ends of the synthetic cord can be melted to prevent self-dissolving. It is better to take the cord not flat, but round, better if not hollow inside. Shoe laces fit very well. If it is supposed to weave a short and thick lanyard, which should lie comfortably in the hand, then the cord must be selected accordingly. The thicker, coarser and more embossed the cord is, the more grippy the lanyard will be. If a lanyard is supposed to be in the form of a loop that will need to be thrown over the hand, then the cord should be thick so as not to cut the hand and not dig into the skin, and the cord should also be smooth and round in cross section so that it does not crush or rub. Lanyards that carry purely decorative functions can be weaved from anything and in any way. The color of the cord is a purely individual matter. But, when going out into nature, it is better to equip your knives with lanyards of contrasting colors, i.e. bright red, poisonous green or purple, etc. The more unnatural and provocative the color of the lanyard, the less likely it is to lose the knife in the grass or fallen leaves.
Lanyards are woven not only on knives. Often you can find a lanyard on the scabbard and cases.

The purpose of such lanyards is the same. Sometimes you need to tightly fasten the knife, in which case you can unweave the lanyard and tie the knife to the equipment, leg or arm with a cord. Also, with the received cord, you can tie something (or someone), apply a tourniquet, etc.
Here are a few examples of lanyards, their manufacture and application.

I. Weaving "Cage"

Two cords about 25 cm long are tied in a knot in the middle.

Weave together in a cage. All ends overlap each other at right angles so that each previous one passes under the one in front.

Having finished the first tier, we tighten the ends well, and repeat the same thing, adding the second to the first tier, the third to the second, etc.

We get a lanyard in cross section. It is important to weave strictly in one direction, and not violate the alternation order, otherwise the lanyard will turn out to be crooked and shapeless. The tighter the ends are tightened, the smoother and stiffer the lanyard will be, if it is necessary to give it flexibility and softness, you need to tighten it accordingly weaker. Once you have decided that your lanyard has reached the desired length, we complete the weaving and complete the pommel. You can simply cut the cords and melt the ends.

You can collect all four ends of the cord together and tie a knot, then cut the ends and melt. We get something like a "monkey paw".

It is very important to leave a little play at the very beginning so that the lanyard is not tightly tied to the knife, but can easily move and be thrown from one side to the other.
This method has a couple of disadvantages. Firstly, a lanyard woven in this way cannot be unraveled and woven again (only if it is smaller). The second disadvantage is that the cord is cut into two parts. It may happen that you need a strong cord or rope, then an unwoven lanyard can come in handy. And tying the two halves of the cord is still not as convenient and reliable as using a solid cord. The third drawback is the static nature of the lanyard. If you equip a collapsible knife with such a lanyard, then the lanyard will have to be untwisted for disassembly. Of course, you can try and not unravel, but then disassembling and assembling the knife will turn into real torture.
Such a lanyard, especially in combination with the "monkey's paw", is recommended to weave on knives with a small handle.
It is convenient for him to pull out a knife from his pocket, or by holding it to inflict chopping blows with a knife.

II. Weaving "Whip" or "Hangman's Knot"

We need a cord 25-30 cm long. We pass the cord through the hole on the knife handle.

We leave about a quarter of the length motionless, and fold the rest of the segment with a loop, so that the long and movable end is at the very handle.

Having folded three layers of a fixed cord, we begin to wind the long end around them with turns.

Starting the winding at the handle itself, we impose even and dense turns. As soon as the length is considered sufficient, we thread the movable end of the cord into the loop formed and tighten it from the opposite end.

The advantages of this method are directly opposite to the disadvantages of the previous one. This lanyard can be unraveled and re-woven. Having dissolved it, we get a rather long lace, which can be very useful. For example, tie a knife to a stick and make a spear. By loosening the knot and getting a fairly wide loop, you can easily disassemble and assemble the knife for repair or cleaning.

III. Weaving "Long loop"

It is performed in the same way as the "Lash" with the only difference being that there are much fewer turns. The ends of the cord should be left a little longer and tied at the end with a knot, after which they should also be cut and melted.

There should be few turns, and they should not be wound too tight, the knot should move freely in both directions. Such a lanyard can be thrown around the wrist and the “gallows knot” makes it possible to tighten the loop tighter to fit tightly to the size of the wrist, and thereby prevent slipping from the hand.

VI. Weaving "Tape"

On such a lanyard, much more cord is required. One cord is much shorter than the other. Two cords are tied in such a way that there are three short, equal in length ends, and one is much longer than the others.

We leave the three short ends motionless, and the long end will be our slider. The long end is woven between three short ones in a checkerboard pattern, for example, from left to right.

Having reached the far right end of the cord, we also weave in a checkerboard pattern from right to left. So we get a wide ribbon. You can make the tape wider by taking not two cords, but three, etc. As soon as we reach the desired length, we again perform the top. Here it is performed in the same way as in the previous methods. You can cut off all the ends and melt, you can tie two knots, you can collect all the cords together and tie into a knot.

There are still a great many other species, more beautiful and more complex, but we will not go so far. However, nothing prevents you from experimenting and coming up with something new. Good luck!

Material from the site: http://knifelife.ru

When making knives for the handle, I usually use textolite or wood, but sometimes I resort to weaving.
When people think of braided hilts, they usually think of a single color cord wrapped in a circle. Boring!
So I decided to come up with a beautiful technique using cords of two colors. This is the second knife, the handle of which I decorated in this way. In the first case, I wove with black and luminous cord. I sat in front of the TV, holding a knife in one hand, and in the other I had black and luminous cords. I started experimenting and this is what I came up with.
I hope you will like it.

Tools

You will need:

ruler,
paracord (2 colors),
lighter,
multitool (you can use simple pliers, and something sharp to cut the cord).

Cut and gut

Cut the required length of each color paracord, I do this sparingly. Remember that it is easier to cut off the excess than to build up if it is not enough.
Go ahead and don't forget to remove the inner strands. To do this, you need to make sure that they are not soldered to the outer shell, and pull them out.

Get ready to weave

Wrap the cutting edge of the blade with electrical tape to prevent cuts.
Pass the cords into the hole from which you start weaving, a couple of centimeters. Now you need to think. Whichever side you put the cords on, they will leave a ledge on it, so I always leave it on the inside of the handle. The inside is where your fingers rest on the handle, not your palm. If you do this, then the knife will be more comfortable in your hand.
In my opinion, there is logic in this.
So, after you thread the ends of the cord into the upper hole, glue their ends to the metal of the handle. Then they will lie more evenly and will not interfere during weaving. Just don't stick your fingers together.

Weaving

Do you know how the first knot is made when you lace up your shoes? We will use this node.
Flip the cords to the side where the glued ends are. The black should go under the orange, then drape it over the orange (just look at the photo and it will become clear).
After that, turn the knife over to the other side and do the same steps now on it. The cord must be well tightened. Then turn the knife over again and repeat.

Entertainment

While weaving, I like to watch an interesting show. But remember to pay attention to what you are doing.

ending

After the weave approaches the bottom hole, one cord will be closer to it, the other a little to the side. In my case, black turned out to be closer. Thread the near one into the hole, and continue wrapping the handle around the far one and thread it through the other side. Now tie a knot, and with the rest of the cords you can do whatever you want. I usually hook on a fun bead and then tie the knot again. But I didn’t have anything at hand, so I just cut off the edges a couple of centimeters below the knot.

resin coating

Now you need to completely wrap the blade with electrical tape and other parts that should not have resin on it. Of course, it can be removed from steel, but why waste time on this.
Stir in a small amount of glass fiber resin. I used 30 ml, but half would have been enough for me. It just wasn't available. measuring cup slightly less.
Take an inexpensive brush and gently apply the resin all over the lacing. Let it soak in, if necessary, apply the resin again. Then clamp the blade in a vise to dry the hilt.
After a few minutes, take out the knife and turn it over so that the resin does not solidify as a drop on the side of the handle that is pointing down.

What is a knife lanyard? This is the name of a special kind of braided cord, which is tied at one end to the hilt of a weapon. Using it, you can make the knife more functional and aesthetic. Why exactly do you need this device and how to make it yourself, we will consider further.

Main functions

There are only two main types of lanyards:

With a loop. Such a device is necessary primarily in order to prevent the loss of weapons in the event that it accidentally slips out of hands. When cutting, such a lanyard with a loop thrown over, albeit a little, but relieves the load from the brush. You can also quickly release your hand. The knife will just hang on it. If necessary, the weapon can be hung by the loop during transportation or storage. Loop lanyards for knives are among the most functional.
Lace or tail. When using this type of knife, you can very quickly get it out of your pocket or case. The lace in this case is a kind of flexible continuation of the weapon itself. With wide movements, the knife to which such a device is attached behaves more predictably, as it acquires additional inertia. Another function of such lanyards is purely decorative. Sometimes they serve as decoration, for example,

Varieties of devices

What can be weaved from

do it yourself

With your own hands, you can make a very practical lanyard for a knife.

A hole with a diameter of approximately 5 mm is drilled in the knife handle. Unless, of course, it's not there in the first place. Sometimes there is a special loop on the knives. In this case, nothing needs to be drilled either.
The cord must be cut into two parts of 25 cm each. One of them is tied to the handle with a regular knot. This cord will also need to be attached to the middle of the second part. A very good solution would be to take two cords of different colors for work. In this case, much more attractive lanyards for knives are obtained.
The resulting four free ends of the cords will need to be woven into a cage. This technology is very simple. The ends overlap each other at an angle of 90 degrees. In this case, each previous cord passes under the one located in front. In the process of weaving, the ends should be tightened as tight as possible. In this case, the finished product will be more convenient and last longer. In addition, tightly woven lanyards look much neater.
Having finished weaving, you will need to tie a knot. The ends should be trimmed, cut off, and hidden inside the resulting product. Sometimes they are pre-melted. This can prevent cords from unraveling. However, it is worth considering that the lanyard itself will be less reliable. The finished product can at one point simply unravel, and the laces can get tangled. In this case, the lanyard from the knife will have to be cut off.

If you wish, you can learn how to make very beautiful and practical lanyards for The technology discussed above is absolutely simple. A handy knife attachment can be made in a couple of hours.

Popular in category: